3 rants for the price of 1, isn't that a great deal!

1. HP, you braindead fucking morons!!!

So recently I disassembled this HP laptop of mine to unfuck it at the hardware level. Some issues with the hinge that I had to solve. So I had to disassemble not only the bottom of the laptop but also the display panel itself. Turns out that HP - being the certified enganeers they are - made the following fuckups, with probably many more that I didn't even notice yet.

- They used fucking glue to ensure that the bottom of the display frame stays connected to the panel. Cheap solution to what should've been "MAKE A FUCKING DECENT FRAME?!" but a royal pain in the ass to disassemble. Luckily I was careful and didn't damage the panel, but the chance of that happening was most certainly nonzero.
- They connected the ribbon cables for the keyboard in such a way that you have to reach all the way into the spacing between the keyboard and the motherboard to connect the bloody things. And some extra spacing on the ribbon cables to enable servicing with some room for actually connecting the bloody things easily.. as Carlos Mantos would say it - M-m-M, nonoNO!!!
- Oh and let's not forget an old flaw that I noticed ages ago in this turd. The CPU goes straight to 70°C during boot-up but turning on the fan.. again, M-m-M, nonoNO!!! Let's just get the bloody thing to overheat, freeze completely and force the user to power cycle the machine, right? That's gonna be a great way to make them satisfied, RIGHT?! NO MOTHERFUCKERS, AND I WILL DISCONNECT THE DATA LINES OF THIS FUCKING THING TO MAKE IT SPIN ALL THE TIME, AS IT SHOULD!!! Certified fucking braindead abominations of engineers!!!

Oh and not only that, this laptop is outperformed by a Raspberry Pi 3B in performance, thermals, price and product quality.. A FUCKING SINGLE BOARD COMPUTER!!! Isn't that a great joke. Someone here mentioned earlier that HP and Acer seem to have been competing for a long time to make the shittiest products possible, and boy they fucking do. If there's anything that makes both of those shitcompanies remarkable, that'd be it.

2. If I want to conduct a pentest, I don't want to have to relearn the bloody tool!

Recently I did a Burp Suite test to see how the devRant web app logs in, but due to my Burp Suite being the community edition, I couldn't save it. Fucking amazing, thanks PortSwigger! And I couldn't recreate the results anymore due to what I think is a change in the web app. But I'll get back to that later.

So I fired up bettercap (which works at lower network layers and can conduct ARP poisoning and DNS cache poisoning) with the intent to ARP poison my phone and get the results straight from the devRant Android app. I haven't used this tool since around 2017 due to the fact that I kinda lost interest in offensive security. When I fired it up again a few days ago in my PTbox (which is a VM somewhere else on the network) and today again in my newly recovered HP laptop, I noticed that both hosts now have an updated version of bettercap, in which the options completely changed. It's now got different command-line switches and some interactive mode. Needless to say, I have no idea how to use this bloody thing anymore and don't feel like learning it all over again for a single test. Maybe this is why users often dislike changes to the UI, and why some sysadmins refrain from updating their servers? When you have users of any kind, you should at all times honor their installations, give them time to change their individual configurations - tell them that they should! - in other words give them a grace time, and allow for backwards compatibility for as long as feasible.

3. devRant web app!!

As mentioned earlier I tried to scrape the web app's login flow with Burp Suite but every time that I try to log in with its proxy enabled, it doesn't open the login form but instead just makes a GET request to /feed/top/month?login=1 without ever allowing me to actually log in. This happens in both Chromium and Firefox, in Windows and Arch Linux. Clearly this is a change to the web app, and a very undesirable one. Especially considering that the login flow for the API isn't documented anywhere as far as I know.

So, can this update to the web app be rolled back, merged back to an older version of that login flow or can I at least know how I'm supposed to log in to this API in order to be able to start developing my own client?

2AM and a birthday party of my BELOVED mother that I have to attend tomorrow in the middle of bumfuck. And I'm not sleeping, oh no.. because "family obligations" require me to get her a present on 2 days notice. I'm making her something very simple, some LED's displaying her new age, powered by a lithium cell and some charge-boost-protection controller. So I need to make a mesh to place the LED's to make those characters.

Measuring the size of the project box, cut it out.. started drawing the numbers on it. Not satisfied and ain't nobody got time for that. Guess I'll just print something out. Drew a little image with some text on my tablet, sent it to the printer. Black apparently doesn't want to print anymore even though it's still fucking full.

HP YOU CERTIFIED MOTHERFUCKERS!!! How fucking difficult can it be to make a printer and make it into something that doesn't shit on me every fucking time I want to use it?! Why do I have to deal with your shit, on top of my mother's?! WHY?!!!!

Fuck me. Happy birthday to my mother, and silently I wish that it's her last one. The bitch wouldn't - no she didn't - piss on me even when I was on fire!! Where were you "dear family member" when I was homeless, huh?! WHERE WERE YOU, WHEN I STOOD ON TOP OF A BRIDGE, READY TO END MY LIFE AND BEGGED TO YOU TO ALLOW ME TO STAY IN YOUR HOME FOR THE NIGHT?! Mother my fucking ass. A blood bond that I wish I never had! And that I have to work for now, because you fucking bitch can't even possibly think as far into the future as to invite your peers for a birthday party.. I dunno, maybe a week in advance, like a sensible human being would? At least she's improving, my little sister's and brother's birthdays she just invited me for the day before. And I also had to get a present ready for, in the middle of the fucking night. Fucking hell!!!

"Thank you for choosing Microsoft!"

No Microsoft, I really didn't choose you. This crappy hardware made you the inevitable, not a choice.

And like hell do I want to run your crappy shit OS. I tried to reset my PC, got all my programs removed (because that's obviously where the errors are, not the OS, right? Certified motherfuckers). Yet the shit still didn't get resolved even after a reset. Installing Windows freshly again, because "I chose this".

Give me a break, Microshaft. If it wasn't for your crappy OS, I would've gone to sleep hours ago. Yet me disabling your shitty telemetry brought this shit upon me, by disabling me to get Insider updates just because I added a registry key and disabled a service. Just how much are you going to force data collection out of your "nothing to hide, nothing to fear" users, Microsoft?

Honestly, at this point I think that Microsoft under Ballmer might've been better. Because while Linux was apparently cancer back then, at least this shitty data collection for "a free OS" wasn't yet a thing back then.

My mother still runs Vista, an OS that has since a few months ago reached EOL. Last time she visited me I recommended her to switch to Windows 7, because it looks the same but is better in terms of performance and is still supported. She refused, because it might damage her configurations. Granted, that's probably full of malware but at this point I'm glad she did.

Even Windows 7 has telemetry forcibly enabled at this point. Vista may be unsupported, but at least it didn't fall victim to the current status quo - data mining on every Microshaft OS that's still supported.

Microsoft may have been shady ever since they pursued manufacturers into defaulting to their OS, and GPU manufacturers will probably also have been lobbied into supporting Windows exclusively. But this data mining shit? Not even the Ballmer era was as horrible as this. My mother may not realize it, but she unknowingly avoided it.

In electronics there's 3 options.
1. You pay a small fortune to get something decent.
2. You pay a smaller fortune to get crap.
3. You build it yourself and it'll be nicely priced AND decent.

Why is that? I have no idea. Profiteering gluttons perhaps.

Case in point: my watch. A waterproof one, so you'd expect to be able to take it in the shower, which I often did.
But then, le wild drop from 50cm height occurred and the whole thing just popped open, with soapy water rushing in. Luckily it didn't short out, and I quickly evacuated it out of the shower and dipped it with my towel.

Then already I thought.. what the fuck is wrong with the designers of this thing?! I'm all for keeping the inner parts of electronics accessible for self-servicing. But in a waterproof watch you wouldn't expect the backside to pop right off and expose the bloody internals, would you? So that's one thing. While evacuating it I quickly figured that I'd want to remove the battery immediately.. except that fucking thing was screwed in place?! WHAT THE FUCK?!! Use those screws to keep the fucking backside of the watch in place you certified pieces of shit that designed this craptacular piece of garbage!!!

Finished showering, went ahead and troubleshooted the thing. Miraculously it still worked. Except that now the UI of the fucking thing is biting me in the ass. A single button on the watch is used to operate the whole thing, and get it to set itself to the correct time, get radio signal, go in sleep mode (where the watch stops ticking, for storage purposes) and activate itself again. So I dived into the manual.. and still couldn't get it to work properly. So it's got one button just like an iPhone, it craps itself when it's dropped just like an iPhone, its design is shit just like an iPhone, and it's completely unusable when it craps itself just like an iPhone.

And the manual... Oh fucking shit. It specifies that the watch is 3 bar water resistant, yet apparently you can't take it into the shower. 3 FUCKING BAR!!! That's supposed to enable you to take a fucking dive with it! And apparently you can't drop it either.. who would've thought, when they lock it with no more than outwards pressure from the back plate into the main body! How difficult can it be to use fucking screws, and to make it watertight put some rubber bands or whatever?!

CERTIFIED MOTHERFUCKERS!!!

And the watch, it's in the garbage can right now. Right where it belongs!!

Me: "Concierge, I have noticed this issue with live potential on ground a couple of months ago, just a friendly reminder that this still hasn't been fixed."
Concierge: "Well yeah this building is certified (god I hate that word) so whatever measurements you've taken, it doesn't mean anything when it isn't done by the electricians."
M: "Aha, back to that piece of paper huh.. taking measurements requires a piece of paper these days, doesn't it."
C: "Glad you're quick on the uptake."
M: "Well I have the brains in my head to do a proper measurement without dying, and the numbers don't lie."
C: "What do you think that the landlord is going to say? I'm sure you still remember that email "DON'T TOUCH THE ELECTRICITY!""
C: "And remember that she'll probably rather file a complaint against you than to let an electrician come check it, because the latter costs money for something that's already certified."
M: "Well that sucks..."
C: "The certified electricians certified this building. Your hands are pretty much tied."
M: …

*walks off in frustration*

Now, as for the rant. *inhales deeply*

YOU KNOW WHERE YOU CAN SHOVE THAT PIECE OF PAPER?! DOWN YOUR FUCKING ASS! WHAT DOES A FUCKING PIECE OF PAPER MEAN TO JUSTIFY WRONGDOING?! WHAT DOES IT FUCKING MEAN WHEN IT ISN'T BACKED BY A FUCKING BRAIN?!

Yet I apparently can't do anything, because I refuse to certify myself. Now you know why I fucking hate certified enganeers, and why I use that word. The piece of paper doesn't mean shit when you can't back it with an actual fucking brain. And requiring a certificate to do stupid shit, even for changing a fucking light bulb, or a switch or an outlet or whatever. Certified enganeers, because fuckers like that don't deserve to be called engineers. You know what, certified motherfuckers? FUCK YOU!! I can change it myself and I don't (shouldn't) need a bloody fucking certificate for that!!

Just disassembled 2 €5 desk fans because they were shit.. and so is their design apparently.

What I found inside was actually surprisingly simple.. a toddler could build it. It's just a DC motor, a 3PDT switch, DC barrel connector, some wires and screws to hold stuff in place. Oh and the plastic thingie with the fan blades, as well as the USB cable of course.

5 fucking euros. The combined cost of the components would be less than 3, certified motherfuckturers. Time to build it, injection moulding, transportation, sure.. but still.

And if you think that being salty about €5 is cheap shittalk, expand that to every fucking piece of electronics that doesn't cost a small fortune.. at all price ranges. Could be radios, alarm clocks, heck even phones. Shit's way too expensive for what it's worth. Perhaps because so many people in the industry are just here for a quick buck.. motherfuckers 😒

Anyway, back to the design.. the hole in the fan blade thingie is supposed to get the motor's shaft shafted in, to turn the blades. I'd use glue there.. but not these designers. They just shove it in and hope that friction takes care of everything. And one of the fan blade modules' hole was so wide that inserting the motor is like throwing a sausage down the hallway. No contact at all! Make it tight already like the Chinese designer's glory-...
Nah let's not get into Chinese tightness just yet.

Oh and also a resistor for slow mode. Consumes just as much power except the fan turns slower. Because fuck efficiency, right?

Goddammit, next time I'm just gonna build my own again.. at least that wouldn't be a certified piece of shit 😑

WanBLowS: We're adding some extra features!!!
Me: Oh great! Can't wait for it!
*gets up from bed to mash that power button*
Me: DIE MOTHERFUCKER, AND FUCK THAT SHITTY FEATURE!!!

New feature on the Cuntbook. Want to write a post to a page? Poof, and it's gone! BILLION DOLLAR FUCKING FEATURE!!! BILLION DOLLAR FUCKING COMPANY!!!

CERTIFIED MOTHERFUCKERS!!!!

Oh and just to load our pages it takes 20 seconds. Because fuck you, this is Web 2.0. FUCK!!!

I just gave robocopy another try, in order to get my WanBLowS D: drive and my file server synchronized again, in preparation to move that file server VM to a LXC container instead.. bad choice. I should've used rsync in WSL.

Hey you Not so Robust File Copier for WanBLowS, how many attempts of you fucking up my file server's dotfiles does it take before I configure you right with every fucking option you have specified? How about you actually behave somewhat decently like rsync where -avz works 99% of the time, in local, remote, any scenarios that you can think of that aren't super obscure?! HOW DIFFICULT CAN IT BE, REDMOND CERTIFIED ENGANEERS?!!

Drown in a pond of bleach, Microshit certified MOTHERFUCKERS!!!!

Well, at least this time it didn't fuck up my .ssh directory so I can still authenticate to the VM.. so I guess that at least that's a win. Even that you can't take for granted anymore with this piece of garbage!!!

I thought I'd opened every shitty type of Chinese-grade electronics by now. Glued in shit, ultrasonically welded shit, potted shit. And occasionally the now very rare piece of electronics that has actual screws.

Until now. Remington, apparently yet another company filled with certified enganeers. My razor is from them, and I wanted to open it up to see why the lithium cell inside was failing, and to replace it with a bigger one. 2 screws in the back of the unit, Phillips head. But holy fuck, those things sat in there more tightly than the glory hole of the Asian girl that probably assembled this thing. Externalizing our own features in our craft? Check!

Pretty hard to remove them but that's fine. But the unit didn't open up, and there seems to be no screws left. I guess that they leveled up their level of certified enganeering and actually used both screws and ultrasonic welding. Because why wouldn't you, right?!

Motherfuckers.