Takes forever. Finally completed the build. Got the cooler from newegg, which shipped from Taiwan.

First I wondered why you posted a half finished build. Then I realized it was finished. Nicely done. As with any installation; if you can't see it you've probably done a good job.

Yeah what specs are we looking at

@vlatkozelka @nitehound so I build a ryzen 7 2700 with rtx2070 on a gigabyte b450 board before rtx2060 released (been a while)

crucial 16GB ddr4 2666
gigabyte windforce rtx2070
Evga non-modular 550w psu
Intel 500Gb nvme m2
1Tb 2.5 sata ssd from Samsung.

The idea is to pick as high end as possible but cheapest part with the same spec.

RAM overclock to 3060 on 16-18-18-38 1t on 1.35v. Won’t start if I go further.

Play around vcore and multiplier, but cpu got quite hot after 3.65G. And sometimes it won’t boot. so I give up.

Added 3 noctua case fans. But don’t help much.

The GPU card starts sagging right away, so added a GPU support.

Considering an AIO watercooler but a already got fun installed. Worry about this case won’t fit a 120 cup tower fan. Until recently I decided to gamble. And it works out!

All cables are routed and tied with Velcro, all RGB lights are turned off as possible to keep the professional look.👌

😨wow good stuff
OS?

@nitehound tried Linux. The nvidia driver failed to build. Switch back to windows. I’m thinking to build another i7 pc without dedicate graphics

@vlatkozelka I might be old school, but all my friends who use aio having problems. EKWB’s custom kits looks good, but this case just couldn’t fit.

@vlatkozelka this EVGA PSU has a 85+ gold cert. but it’s not modular, so I have to remove the 3.5 hard drive cage for hiding the cables 🤦‍♂️
For every dollar I saved, there’s an obvious drawback...

@Nanos once you installed these noctua brown fans... RGB is no long acceptable in your build 😌

looks like a mining pc🤔

@Nanos yeap. I also wonder how these cards work together

@Nanos I searched local pc store. Can’t find any 50 inch beast... the maximum size they carry is 32”😱

beautiful beast!