30
Mizz141
6y

Upgraded my Ram, Broke the Tape...
How to totally not fix your PC

Comments
  • 2
    Did it work again?
  • 0
    @gitpush nope, Look at comment of mine pls
  • 1
    OH FUCK!
    I NEED HELP ASAP!
    This is what happened,
    I upgraded my Ram to 32 GBs from 16
    Then I ensured that everything was plugged in Properly, when it was I closed my PC case.
    Plugged everything in and...
    Black Screen...
    Shutdown pc, plugged everything out hit the on/Off Button several times, plugged everything in and... Black Screen...
    Monitor is fine...
    But the PC not, it Boots but Black Screen and Keyboard and mice are not responding at all...
    Can ANYONE OUT THERE HELP ME! IM REALLY FUCKING SCARED RIGHT NOW THAT I NEED A NEW PC! HALP!
  • 0
    @Mizz141 when you boot nothing at all happens? Just black screen? I mean do you see your bios startup?

    It happened with me once where I just took everything out of the motherboard for cleaning and then windows stopped booting I only saw the startup screen of the bios but nothing else, had to format to get it back working. Maybe this is your case too?
  • 3
    Please don't read my comment below if you are easily annoyed
  • 7
    Have you tried duck tape?
  • 0
    @duckduckgo whats that in his screenshot I can only assume its GPU? and why the tape is important? Isn't it just covering sensitive parts and can be replaced?
  • 0
    @gitpush
    I hear the HDD and Fans spin up normally... But Else nothing... No BIOS nothing...
  • 0
    @gitpush not the GPU the CPU those are the Fans for it... And the Tape is for the Airflow of the PC
  • 1
    @Mizz141 put back your old rams what will happen?
    Had a somewhat similar issue on my dad's laptop, gave him my old 2x4GB rams and his laptop doesn't pass the bios screen, put back his old 2x2GB rams and all worked without issues even though the ones I gave him are supported by his motherboard have no clue why it refused to boot, even bios shows 2x4GB
  • 1
    @gitpush
    OK trying this now... Lets hope for the very best
  • 0
    @Mizz141 good luck, since you said those tapes are for AirFlow, that shouldn't break booting up but will make your computer suddenly turn off IF and ONLY IF the flow was not enough to cool down the CPU and it will end up shutting down to prevent damage
  • 1
    @gitpush
    OK, ram is in, closing the case now...
  • 1
    @Mizz141 *holds breath*
    hope it boots without issues :)
  • 2
    @gitpush GUESS WHOS BLACK! MY PC! THANK YOU HERO THANK YOU SO FUCKING MUCH...

    (Now try again with the new ram...)
  • 0
    @Mizz141 Great, now next step: Create a bootable USB of a Linux Distro so that you can mess around with.

    What you need to do is check for bios settings, maybe you changed something or they come pre-loaded with non compatible settings?
    Try resetting its settings and make sure to at least memorize all its settings for the sake of not losing current configs
  • 0
    and check what @Nanos RAM speed does effect if not compatible with your board
  • 0
    Maybe one of the new RAM sticks is fucked up and won't let the PC boot
  • 0
    @Nanos
    I did Check that it works, on the Kingston site because its Kingston RAM...
  • 1
    @MrGrumpyDev
    Hmm... Need to Check that...
    Would be funny if its Bad RAM...
    Would also suck very much because it costed me around 350 bucks
  • 1
    Does your puter support 32Gb?
  • 4
    @duckduckgo
    I wasnt annoyed, I actually had a great laugh in this shit time
  • 0
  • 1
    @Nanos
    1.
    Its a prebuild PC with custom mother board...
    2.
    The ram is the exact Same Speed
    DDR4 2133
    3.
    The PC specs say up to 32GB of DDR4
    4.
    There are only 2 Ram Slots in total...
    5.
    For more info Look up ASUS G20CB
    (The CB is important because there is an oder AJ Version)
  • 0
    Make sure your processor and motherboard support the RAM you are trying to install.

    Sounds like the "new" RAM sticks are not compatible with your current setup.
  • 0
    @Nanos
    I really dont think thats the Problem, as I said its the Same Speed...
    And I need to Look up the BIOS, its the newest available Version and really hard to Access because Windows is on A M.2 SSD which makes it pretty much boot instant...
  • 0
    @Nanos
    I didn't See any jumpers in the MoBo Like never, I know the Old AJ PC's had them but the newer Series doesn't...
  • 0
    @bioDan
    I checked the Ram in the Kingston site, I was VERY Careful with that...
  • 0
    @Condor
    Dont Worry, its Just for some Airflow, the Fans are mounted with some screws...
  • 0
    @monolithicblob
    Mah putter is gud Puter, it does Support 32GB
  • 0
    @Nanos
    It wont boot at all too
  • 0
    @Nanos
    Hey that actually worked! 24GB RAM!
  • 0
    @Nanos
    Yes, works 32GB Ram are there, it think the PC needed to have some Old ram so it could manage the new one...
    It works so.. YAY!
  • 0
    What happens when you plug in an external monitor?
  • 0
    @StazC
    This isn't a Laptop, its a PC with SO-DIMM DDR4 RAM
    So... It works with a external monitor
  • 0
    *reads "tape"
    *sees two wheels
    *interprets as being about cassette tapes
Add Comment