Java is to JavaScript

: what Car is to Carpet
: what Swift is to Suzuki Swift
: what Perl is to a Pearl
: what Ruby is to a Ruby Gemstone
: what Go is to Go Home
: what Shell is to Sea Shell
: what Bash is to Big Bash
: what Alice is to Alice in wonderland
: what Rust is to Rusty Theron
: what Awk is to your Awkward cousin
: what Dart is to Darts
: what Julia is to Julia Roberts
: what Korn is to Corn
: what Maple is to Syrup
: what Caml is to a Camel
: what CHILL is to Netflix
: what Crack is to Crack
: what Curl is to Curls
: what Hugo is to Boss

To be continued..

Have a joke? Say it in comments
Criteria : programming language on left , analog on right

I have this little hobby project going on for a while now, and I thought it's worth sharing. Now at first blush this might seem like just another screenshot with neofetch.. but this thing has quite the story to tell. This laptop is no less than 17 years old.

So, a Compaq nx7010, a business laptop from 2004. It has had plenty of software and hardware mods alike. Let's start with the software.

It's running run-off-the-mill Debian 9, with a custom kernel. The reason why it's running that version of Debian is because of bugs in the network driver (ipw2200) in Debian 10, causing it to disconnect after a day or so. Less of an issue in Debian 9, and seemingly fixed by upgrading the kernel to a custom one. And the kernel is actually one of the things where you can save heaps of space when you do it yourself. The kernel package itself is 8.4MB for this one. The headers are 7.4MB. The stock kernels on the other hand (4.19 at downstream revisions 9, 10 and 13) took up a whole GB of space combined. That is how much I've been able to remove, even from headless systems. The stock kernels are incredibly bloated for what they are.

Other than that, most of the data storage is done through NFS over WiFi, which is actually faster than what is inside this laptop (a CF card which I will get to later).

Now let's talk hardware. And at age 17, you can imagine that it has seen quite a bit of maintenance there. The easiest mod is probably the flash mod. These old laptops use IDE for storage rather than SATA. Now the nice thing about IDE is that it actually lives on to this very day, in CF cards. The pinout is exactly the same. So you can use passive IDE-CF adapters and plug in a CF card. Easy!

The next thing I want to talk about is the battery. And um.. why that one is a bad idea to mod. Finding replacements for such old hardware.. good luck with that. So your other option is something called recelling, where you disassemble the battery and, well, replace the cells. The problem is that those battery packs are built like tanks and the disassembly will likely result in a broken battery housing (which you'll still need). Also the controllers inside those battery packs are either too smart or too stupid to play nicely with new cells. On that laptop at least, the new cells still had a perceived capacity of the old ones, while obviously the voltage on the cells themselves didn't change at all. The laptop thought the batteries were done for, despite still being chock full of juice. Then I tried to recalibrate them in the BIOS and fried the battery controller. Do not try to recell the battery, unless you have a spare already. The controllers and battery housings are complete and utter dogshit.

Next up is the display backlight. Originally this laptop used to use a CCFL backlight, which is a tiny tube that is driven at around 2000 volts. To its controller go either 7, 6, 4 or 3 wires, which are all related and I will get to. Signs of it dying are redshift, and eventually it going out until you close the lid and open it up again. The reason for it is that the voltage required to keep that CCFL "excited" rises over time, beyond what the controller can do.

So, 7-pin configuration is 2x VCC (12V), 2x enable (on or off), 1x adjust (analog brightness), and 2x ground. 6-pin gets rid of 1 enable line. Those are the configurations you'll find in CCFL. Then came LED lighting which required much less power to run. So the 4-pin configuration gets rid of a VCC and a ground line. And finally you have the 3-pin configuration which gets rid of the adjust line, and you can just short it to the enable line.

There are some other mods but I'm running out of characters. Why am I telling you all this? The reason is that this laptop doesn't feel any different to use than the ThinkPad x220 and IdeaPad Y700 I have on my desk (with 6c12t, 32G of RAM, ~1TB of SSDs and 2TB HDDs). A hefty setup compared to a very dated one, yet they feel the same. It can do web browsing, I can chat on Telegram with it, and I can do programming on it. So, if you're looking for a hobby project, maybe some kind of restrictions on your hardware to spark that creativity that makes code better, I can highly recommend it. I think I'm almost done with this project, and it was heaps of fun :D

1. No more coding on paper! Why can some already write essays on laptops but programmers are stuck with "analog"?
2. No vendor lock-ins! Teach free, cross-platform development, not VB.NET.
3. No more professors stuck in the eighties! If all you know is 6800 assembly, GTFO. I heard NASA was hiring...
4. Enforce code style consistency, proper documentation and even VCS for larger projects
5. Algorithms -> scripting -> programming. Don't quickly explain the basics, then throw students straight into Java.

After finishing apprenticeship my boss wanted to print every source code of our website (also CMS) as well our onlineshop (the whole not just own modules).
His intention was to inspect the code offline so he can i.e. lay sheets side by side for an better overview about any relations. Ich knew that he won't believe me if i tell him that's a bad idea so i printed over 10000 sites of source code.
He never looked a single time over it