Join devRant
Do all the things like
++ or -- rants, post your own rants, comment on others' rants and build your customized dev avatar
Sign Up
Pipeless API
From the creators of devRant, Pipeless lets you power real-time personalized recommendations and activity feeds using a simple API
Learn More
Search - "false alarm"
-
Waking up, feeling like I have a cold I sit down at my computer and see that my biggest client has asked for a minor change. I haven't had my coffee yet, but I can do what they're asking for in a minute. The site is *gone*. Just a permissions error. Have they been hacked?! Why hasn't the client called me?! The files are there and no changes have been made. It doesn't come up on any browser. 10 panicked minutes later I check it on my phone. It comes up. Wait a minute ... While editing /etc/hosts yesterday I'd accidentally uncommented a line for this site that I'd foolishly left in there. One character later my false alarm is solved. I'm getting my damned coffee now.1
-
A tip to tech folks from my personal xp.
If you fuck up and make an impacting mistake in your company, like taking PROD down, noone is going to fire you on spot. Assign some more mandatory trainings - maybe. So you'd be more careful next time.
See, it's not worth getting rid of someone who made a mistake. You should be seated down and insisted to fix it. If you don't - then they might consider firing it. If you do fix it [with help or alone] - you become a more valuable asset to the company as you prove you are responsible for your actions and you take it seriously. You show that you can clean up your own shit and you don't need a babysiter next to you.
If you simply make a mistake and they replace you with someone else, that someone else is likely to be unaware of your mistakes and is doomed to repeat them. It's just bad for business.
Ofc if you making mistakes becomes a tendency rather than an exception, it's also a red flag for the business.
Don't get too laxed! And always answer for your shit. Never hide a fuckup - always alarm about it asap so that corrective actions could be taken by respective organs of the company while you are fixing it.
Come up with an action plan, announce it. Estimate resources you need [like help from others] - announce that too. Update concerned parties every half an hour or so about the status. If you find you need anything else while fixing it or you come across some blockers/delays/change of impact - always announce asap. Do avoid false alarms and disinformation.
// inspired by someone's rant today7 -
Do ya ever hate how often people use the term "AI" so loosely. It's like saying your thermostat or your "smart oven" (or "smart"-everything) is "AI-infused" because it can regulate the temperature. Unless the machine actually learns something for next time around, a bunch of "if" statements isn't truly AI in my book.5
-
You do know that "why do I need you if I can copy-paste code from SO?" joke floating around, right? Today I had a real-life situation perfectly illustrating it.
So I bought a set of parking sensors. Cheap ones, from AliExpress. Prolly the cheapest ones I could find. Installed them w/ engine turned off. All seemed fine. Cleaned it all up, got ready to go, started the engine and beeeep beeep beeepeeeeep beepp ..... beeeeeeeeep.
fuck.
Tried unplugging/replugging them one-by-one to find the faulty one. Nada. Apparently they all were false-alarming. They must all be bad, bcz they seem to work well w/ engine turned off (ignition on) and only false-alarm when engine is on.
Allright, I'll get a new set next weekend, a more expensive one and replace them again.
There goes my €20 and another week basically w/o parking sensors (car length is >5 meters, so sensors do help a lot).
Today I spend a few hours removing my rear bumper again, replacint all the sensors, wiring, etc. Tests show promising results - all sensors seem OK even w/ engine on! Close it all up, start a car again and.... beeep bep bep beeep beeee..eeeeppp.
MOTHER FUCK!
Another 30min-hour goes by while looking for a possible culprit. And I found it. The fix could did not take longer than 5 seconds. Apparently a wire feedint the sensors' controller was too close to sensors' wires. All I had to do is to push that wire a lil further from the controller with my index finger.
I could have saved €30, a week of time, half a day of work if I only knew what wire to [literally] poke.
shit...4 -
Friday 5:13pm
- Critical report: "We're allowing users to withdraw more money then they actually have in their accounts"
5:16pm
- "False alarm. There is pagination on the transactions interface". Have a nice weekend everyone!1 -
Bragging about knowing how to hack the company's emails definitely gets you into trouble. And then coming out clean and saying it was all a bluff still gets you into trouble. Hacking jokes in the office is same as a bomb joke in public(crowded) places.
-
Completed a python project, started as interest but completed as an academic project.
smart surveillance system for museum
Requirements
To run this you need a CUDA enabled GPU on your computer. (Highly recommended)
It will also run on computers without GPU i.e. it will run on your processor giving you very poor FPS(around 0.6 to 1FPS), you can use AWS too.
About the project
One needs to collect lots of images of the artifacts or objects for training the model.
Once the training is done you can simply use the model by editing the 'options' in webcam files and labels of your object.
Features
It continuously tracks the artifact.
Alarm triggers when artifact goes missing from the feed.
It marks the location where it was last seen.
Captures the face from the feed of suspects.
Alarm triggering when artifact is disturbed from original position.
Multiple feed tracking(If artifact goes missing from feed 1 due to occlusion a false alarm won't be triggered since it looks for the artifact in the other feeds)
Project link https://github.com/globefire/...
Demo link
https://youtu.be/I3j_2NcZQds2 -
Avast stoping my benchmark and reporting it to me is like a dog that proudly brings a bone to you while you walk with him on a cemetery.
I know about it before I started the benchmark so i deactivated it for 30min, but then for some reason (i may have accidently clicked on the symbol) the ui opened and everytime it does that it for some reason resets the option so it was active again. Now it deleted parts of the Software and I have a hard time making it run again. Fml and fuck monday. Why isn't there an option to make a fucking exception or remove something from their fucking virus container if it was a false alarm?6 -
AV heuristics toggle alarms on a program I created. I did not know that I integrated some virus features. Lovely.1