I really, honestly, am getting annoyed when someone tells me that "Linux is user-friendly". Some people seem to think that because they themselves can install Linux, that anyone can, and because I still use Windows I'm some sort of a noob.

So let me tell you why I don't use Linux: because it never actually "just works". I have tried, at the very least two dozen times, to install one distro or another on a machine that I owned. Never, not even once, not even *close*, has it installed and worked without failing on some part of my hardware.

My last experience was with Ubuntu 17.04, supposed to have great hardware and software support. I have a popular Dell Alienware machine with extremely common hardware (please don't hate me, I had a great deal through work with an interest-free loan to buy it!), and I thought for just one moment that maybe Ubuntu had reached the point where it just, y'know, fucking worked when installing it... but no. Not a chance.

It started with my monitors. My secondary monitor that worked fine on Windows and never once failed to display anything, simply didn't work. It wasn't detected, it didn't turn on, it just failed. After hours of toiling with bash commands and fucking around in x conf files, I finally figured out that for some reason, it didn't like my two IDENTICAL monitors on IDENTICAL cables on the SAME video card. I fixed it by using a DVI to HDMI adapter....

Then was my sound card. It appeared to be detected and working, but it was playing at like 0.01% volume. The system volume was fine, the speaker volume was fine, everything appeared great except I literally had no fucking sound. I tried everything from using the front output to checking if it was going to my display through HDMI to "switching the audio sublayer from alsa to whatever the hell other thing exists" but nothing worked. I gave up.

My mouse? Hell. It's a Corsair Gaming mouse, nothing fancy, it only has a couple extra buttons - none of those worked, not even the goddamn scrollwheel. I didn't expect the *lights* to work, but the "back" and "Forward" buttons? COME ON. After an hour, I just gave up.

My media keyboard that's like 15 years old and is of IBM brand obviously wasn't recognized. Didn't even bother with that one.

Of my 3 different network adapters (2 connectors, one wifi), only one physical card was detected. Bluetooth didn't work. At this point I was so tired of finding things that didn't work that I tried something else.

My work VPN... holy shit have you ever tried configuring a corporate VPN on Linux? Goddamn. On windows it's "next next next finish then enter your username/password" and on Linux it's "get this specific format TLS certificate from your IT with a private key and put it in this network conf and then run this whatever command to...." yeah no.

And don't get me started on even attempting to play GAMES on this fucking OS. I mean, even installing the graphic drivers? Never in my life have I had to *exit the GUI layer of an OS* to install a graphic driver. That would be like dropping down to MS-DOS on Windows to install Nvidia drivers. Holy shit what the fuck guys. And don't get me started on WINE, I ain't touching this "not an emulator emulator" with a 10-foot pole.

And then, you start reading online for all these problems and it's a mix of "here are 9038245 steps to fix your problem in the terminal" and "fucking noob go back to Windows if you can't deal with it" posts.

It's SO FUCKING FRUSTRATING, I spent a whole day trying to get a BASIC system up and running, where it takes a half-hour AT MOST with any version of Windows. I'm just... done.

I will give Ubuntu one redeeming quality, however. On the Live USB, you can use the `dd` command to mirror a whole drive in a few minutes. And when you're doing fucking around with this piece of shit OS that refuses to do simple things like "playing audio", `dd` will restore Windows right back to where it was as if Ubuntu never existed in the first place.

Thanks, `dd`. I wish you were on Windows. Your OS is the LEAST user friendly thing I've ever had to deal with.

--- SUMMARY OF THE APPLE KEYNOTE ON THE 30TH OF OCTOBER 2018 ---

MacBook Air:
> Retina Display
> Touch ID
> 17% less volume
> 8GB RAM
> 128GB SSD
> T2 Chip (Core i5 with 1.6 GHz / 3.6 GHz in turbo mode)
Price starting at $1199

Mac Mini:
> T2 Chip
> up to 64GB RAM
> up to 2TB all-flash SSD
> better cooling than previous Mac Mini
> more ports than previous Mac Mini - even HDMI, so you can connect it to any monitor of your choice!
> stackable - yes, you can build a whole data center with them!
Price is 799$

Both MacBook Air and Mac Mini are made of 100% recyled aluminium!
Good job, Apple!

iPad Pro:
> home-button moved to trash
> very sexy edges (kinda like iPhone 4, but better)
> all-screen design - no more ugly borders on the top and bottom of the screen
> 15% thinner and 25% less volume than previous iPads
> liquid retina display (same as the new iPhone XR)
> Face ID - The most secure way to login to your iPad!
> A12X Bionic Chip - Insane performance!
> up to 1TB storage - Whoa!
> USB-C - Allow you to connect your iPad to anything! You can even charge your iPhone with your iPad! How cool is that?!
> new Apple Pencil that attaches to the iPad Pro and charges wirelessly
> new, redesigned physical keyboard
Price starting at 799$

Also, Apple introduced "Today at Apple" - Hundreds of sessions and workshops hosted at apple stores everywhere in the world, where you can learn about photography, coding, art and more! (Using Apple devices of course)

I'm typing this with my mouse and an on-screen keyboard, because I don't have my physical one at the moment...
Fuck, imagine coding with a mouse...

Just thought I'd share my current project: Taking an old ISA sound card I got off eBay and wiring it up to an Arduino to control its OPL3 synth from a MIDI keyboard. I have it mostly working now.

No intention to play audio samples, so I've not bothered with any of the DMA stuff - just MIDI (MPU-401 UART) and OPL3.

It has involved learning the pinout of the ISA bus connectors, figuring out which ones are actually used for this card, ignoring the standards a little (hello, amplifier chip that is wired up to the +12V line but which still happily works at +5V...)

Most of the wires going to it are for each bit of the 16-bit address and 8-bit data. Using a couple of shift registers for the address, and a universal shift register for the data. Wrote some fairly primitive ISA bus read/write code, but it was really slow. Eventually found out about SPI and re-wrote the code to use that and it became very fast. Had trouble with some timings, fixed those.

The card is an ISA Plug and Play card, meaning before I could use it I had to tell it what resources to use. Linux driver code and some reverse-engineering of the official Windows/DOS drivers got me past this stage.

Wired up IRQ 5 to an Arduino interrupt to deal with incoming MIDI data, with a routine that buffers it. Ran into trouble with the interrupt happening during I/O and needing to do some I/O inside the handler and had to set a flag to decide whether to disable/re-enable interrupts during I/O.

It looks like total chaos, but the various wires going across the breadboard are mainly to make it easier to deal with the 16-bit address and 8-bit data lines. The LEDs were initially used to check what addresses/data were being sent, but now only one of them is connected and indicates when the interrupt handler is executing.

There's still a lot to do after that though - MIDI and OPL3 are two completely different things so I had to write some code to manage the different "channels" of the OPL3 chip. I have it playing multiple notes at the same time but need to make it able to control the various settings over MIDI. Eventually I might add some physical controls to it and get a PCB made.

The fun part is, I only vaguely know what I'm doing with the electronics side of this. I didn't know what a "shift register" was before this project, nor anything about the workings of the ISA bus. I knew a bit about MIDI (both the protocol and generally how the MPU-401 UART works) along with the operation of a sound card from a driver/software perspective, but everything else is pretty new to me.

As a useful little extra, I made some "fake" components that I can build the software against on a PC, to run some tests before uploading it to the Arduino (mostly just prints out the addresses it is going to try and write to).

!rant

I love coding but i haven't touched a physical keyboard and mouse for 10 days! Feels nice for a change. 😃

devRant is sooo cool. My new
Word-O-Matic physical keyboard word processor setup will increase my rant efficiency. Used velcro to fasten the phone and keyboard on a portfolio notebook! Way faster than virtual keyboard.

I'm wondering.. Chinese have built all sorts of things we never knew we need in our lives. I'm wondering, is there anywhere a physical smartphone keyboard I could purchase? The old-school numpad, like on nokia 3310 or so.

[< > c]
[1 2 3]
[4 5 6]
[7 8 9]
[* 0 #]

I sometimes find myself in situations where I'd like to type the whole message w/o looking at the screen. Touch-keyboards make this an impossible goal. Having an old-school physical kbd would be perfect for the job!

Bug report

Using a physical keyboard seems to prevent me from being able to complete a post. I can open both a comment and new rant, type the contents but am not able to post. The button doesn't do anything.

Switching off the keyboard seems to cause strange behaviour (deleted this rant the first time I was trying)

My setup:
Moto z play android 7.0
SwiftKey keyboard app
Logitec K810 Bluetooth keyboard

What diseases or health problems do programmers commonly suffer from?
How do you take care of yourself? What mistakes you made?

Are computer glasses worth it?
What is the best investment you made for your health? e.g. ergonomic mouse or keyboard. How useful are these ergonomic gadgets?

I'm 26yrs. old. I've learnt the value of physical and mental health, so I'm starting to take care of it now.

Why do I always get attached to dead/dying platforms 😖😫😭
I mean, I got the PSP Go a mere year before devs dropped support. (Still awesome for emulation because of the physical buttons)

I was really interested in windows phone for a while that I almost bit the bullet and bought it.(you obviously know what happened to the beloved windows phone platform)

And now suddenly a blackberry passport video pops up on my YouTube recommended feed and now I really want one.
The problem is the lack of apps, I was hopeful because it supported android runtime.
Then my hopes were crushed after I knew that its based off KitKat.
Which means one of my favorite apps doesn't work there (my beloved termux, I get a boner whenever I think about using it with an actual keyboard 😂)

Should i just bite the bullet? I'm too broke and that 200$ is kinda of a major purchase for me (I'm 17 in a third world country, so the piggy bank is empty AF)

God, why do I always get introduced to platforms too late...

OMG
LVM
WHAT A PIECE OF CRAP

It's so precious that when it detects an existing mdraid signature, it just *won't* let me create a physical volume over it!

No matter that I run pvcreate with double-force switch.
It doesn't matter that the system doesn't even have a single MD device defined (Which can be easily checked in /proc/mdstat OR by checking the /dev subsystem)

I *hate* commands that are trying to be more clever than the admin sitting behind the keyboard.

Sure, leave this as the default behavior (It could save a lot of people's data I bet), but BLOODY HELL GIVE ME A SWITCH TO OVERRIDE THE CHECK YOU DUMBASS.

I swear... I feel like I'll get a frickin' brain hemorrhage from this "clever tool" -_-"