Holy fucking hell!
Who the fuck sets up a local network with an 255.255.0.0 subnet mask and then lets the dhcp-server distribute clients onto the 192.249.x.x., 192.2.x.x and the 192.22.x.x networks AT FUCKING RANDOM???
I need to SSH onto 40 routers distributed across the entire campus and have a WORKING internet connection while doing so and you make me spin the connect-disconnect-wheel. Fucking hell dude, don't give me that "Uh, it wasn't intended for this size"-bullshit. You have about 200 active devices. And in one subnet you have space for more than 60 000. Fuck you, dumbass! OH, YOUR FUCKING LIST IS FUCKING WRONG AND YOU DON'T REMEMBER THE IP OF THE ROUTERS? OH FUCK YOU EVEN HARDER!!!
Goddamn people why does legacy maintenance always suck so much?😭😭😭

Have a couple I want to air today.

First was at my first gig as a dev, 4-5 months out of school. I was the only dev at a startup where the owner was a computer illiterate psycopath with serious temper tantrums. We're talking slamming doors, shouting at you while you are on the phone with customers, the works...

Anyways, what happened was that we needed to do an update in our database to correct some data on a few order lines regarding a specific product. Guess who forgot the fucking where-clause... Did I mention this boss was a cheap ass, dollar stupid, penny wise asshole that refused to have anything but the cheapest hosting? No backups, no test/dev/staging environment, no local copies... Yeah, live devving in prod, fucking all customers with a missing semi-colon (or where clause).

Amazingly, his sheer incompetance saved my ass, because even if I explained it, he didn't get it, and just wanted it fixed as best we could.

The second time was at a different company where we were delivering managed network services for a few municipalities. I was working netops at that time, mostly Cisco branded stuff, from Voice-over-IP and wifi to switches and some routing.

One day I was rolling out a new wireless network, and had to add the VLAN to the core switch on the correct port. VLAN's, for those who don't know, are virtual networks you can use to run several separated networks on the same cable.

To add a VLAN on a Cisco switch one uses the command:

switchport access vlan add XYZ

My mistake was omitting the 'add', which Cisco switches happily accept without warning. That command however can be quite disruptive as it replaces all of the excisting VLAN's with the new one.

Not a big deal on a distribution switch supplying an office floor or something, but on a fucking core switch in the datacenter this meant 20K user had no internet, no access to the applications in the DS, no access to Active Directory etc. Oh and my remote access to that switch also went down the drain...

Luckily a colleague of mine was on site with a console cable and access to config backups. Shit was over within 15 minutes. My boss at that time was thankfully a pragmatic guy who just responded "Well, at least you won't make that mistake again" when we debriefed him after the dust settled.

School, if you're gonna define a custom local DNS for your networks, maybe make sure it's healthy?

I HATE SURFACES SO FRICKING MUCH. OK, sure they're decent when they work. But the problem is that half the time our Surfaces here DON'T work. From not connecting to the network, to only one external screen working when docked, to shutting down due to overheating because Microsoft didn't put fans in them, to the battery getting too hot and bulging.... So. Many. Problems. It finally culminated this past weekend when I had to set up a Laptop 3. It already had a local AD profile set up, so I needed to reset it and let it autoprovision. Should be easy. Generally a half-hour or so job. I perform the reset, and it begins reinstalling Windows. Halfway through, it BSOD's with a NO_BOOT_MEDIA error. Great, now it's stuck in a boot loop. Tried several things to fix it. Nothing worked. Oh well, I may as well just do a clean install of Windows. I plug a flash drive into my PC, download the Media Creation Tool, and try to create an image. It goes through the lengthy process of downloading Windows, then begins creating the media. At 68% it just errors out with no explanation. Hmm. Strange. I try again. Same issue. Well, it's 5:15 on a Friday evening. I'm not staying at work. But the user needs this laptop Monday morning. Fine, I'll take it home and work on it over the weekend. At home, I use my personal PC to create a bootable USB drive. No hitches this time. I plug it into the laptop and boot from it. However, once I hit the Windows installation screen the keyboard stops working. The trackpad doesn't work. The touchscreen doesn't work. Weird, none of the other Surfaces had this issue. Fine, I'll use an external keyboard. Except Microsoft is brilliant and only put one USB-A port on the machine. BRILLIANT. Fortunately I have a USB hub so I plug that in. Now I can use a USB keyboard to proceed through Windows installation. However, when I get to the network connection stage no wireless networks come up. At this point I'm beginning to realize that the drivers which work fine when navigating the UEFI somehow don't work during Windows installation. Oh well. I proceed through setup and then install the drivers. But of course the machine hasn't autoprovisioned because it had no internet connection during setup. OK fine, I decide to reset it again. Surely that BSOD was just a fluke. Nope. Happens again. I again proceed through Windows installation and install the drivers. I decide to try a fresh installation *without* resetting first, thinking maybe whatever bug is causing the BSOD is also deleting the drivers. No dice. OK, I go Googling. Turns out this is a common issue. The Laptop 3 uses wonky drivers and the generic Windows installation drivers won't work right. This is ridiculous. Windows is made by Microsoft. Surface is made by Microsoft. And I'm supposed to believe that I can't even install Windows on the machine properly? Oh well, I'll try it. Apparently I need to extract the Laptop 3 drivers, convert the ESD install file to a WIM file, inject the drivers, then split the WIM file since it's now too big to fit on a FAT32 drive. I honestly didn't even expect this to work, but it did. I ran into quite a few more problems with autoprovisioning which required two more reinstallations, but I won't go into detail on that. All in all, I totaled up 9 hours on that laptop over the weekend. Suffice to say our organization is now looking very hard at DELL for our next machines.

Years ago I was working in local cinema as a student job from time to time and used to sleep after shifts at my uncle's. Uncle did not had internet but there were so many wlans all around. Since I had nothing to do for hours after shift, I downloaded Backtrack linux at home, made live dvd of it and saved a two articles of "how to hack wifi" to text files.

It took me 4 hours to break WEP, since I was total lame, and it was the only one WEP around. They also had mac restrictions set to router, so I changed my mac address to one of their devices, logged in to router and added our mac address. For my uncle it was complete magic but since he is total geek to linux he liked it.

Fast forward weeks later. When I came to my uncle's house he was downloading like ton of linux distributions. Literally each one. Gigabytes of data. I told him not to do so because sooner or later neighbour will notice, but he did not care. Guess what, he notices, probably slow internet and (maybe) bigger bills, I do not know, but owner just changed protocol to WPA2, not changing password. So the story continued for almost 2 years. Felt a bit sorry for neighbour but did not expect such an outcome. I just wanted to watch youtube videos and scroll social networks, keeping low profile so no one notice.

GOOGLE, I WANT TO FUCK YOUR ASS, WHY THE HELL THE NEWER VERSIONS OF ANDROID ARE NO LONGER ABLE TO OPEN THE FUCKING WEB APPS ON LOCAL NETWORKS, THE SAME APP IS ACCESSIBLE FROM IOS AND FUCKING ANDROID CAN’T FIGURE OUT THE CORRECT DNS OF THE LOCAL IP ADDRESS BECAUSE YOU DROPPED IPV4 SUPPORT YOU ASSHOLES.

I love Mikrotik. Just fucking love them. I also love my residential fiber service. Small company. Synchronous 125M service. No caps. Bandwidth is always there.

BUT... They use PPPOE (seriously guys?), and the IP changes on *every single re-connect*. Also: no IPv6 support. I know. I don't need it. But I want it.

Enter DNSMadeEasy's DDNS, Hurricane Electric's 6to4 tunnel service, and my Routerboard AH100x4. I wrote a script that runs on the router whenever my IP changes. It updates my DDNS record, updates my 6to4 tunnel IP using HE's API, and updates my local 6to4 interface's IP.

It just works. My public IPv4 may change, but the /48 IPv6 networks on my LAN side stay fully routeable.

Using grafana together with tinc+promotheus, has been a blast.

Initially I wanted to get into ELK with Kibana and all that, but that required 8G of ram, the instructions to get it running in the open source "mode" was nearly non-existent, together with all the ready docker compose stacks out there simply not working or the images being broken.

I'm sure I could've managed around most of those issues, but the fact it is as hungry as gitlab, made it a literal no-go for the usual server resources my clients host or my own scaled down server recently.

Thankfully I remembered that there's grafana and me having experimented some time ago with tinc, so I can have very lightweight beat'esque prometheus agents deployed listening on tinc local net only, with the typical nginx auth and some whitelists to all of the servers I host and all those of my clients.

The dashboard creation was especially great in grafana (tbf promotheus does actually most of it), literally what I always wanted out of those "complicated" solutions, that do it all, but have no proper query language, complex documentation, heavy collectors with no properly named data points, expensive resource runtimes, ..

with grafana I can just easily put dashboards into folders, create users to look only at certain stats or even dashboards (opened up some interesting contracts actually, because now I can also offer proper monitoring for all things delivered), easily drag and drop around stuff to fit more information (most others fix you to a small 3x2 grid, a too big grid for a TV or simply non resizable tiles, making that one counter take up an entire row) and resize to my hearts desire

tinc of course allows me to easily create private networks that are resistant to failure across any region and the routing is done for me, so I don't have to run around it all that much either

P.S: a damn tiny fly went into one of my now 4 monitors and died right in the middle, because I thought it's just some dirt and I pressed it in while trying to wipe it off, so that monitor now serves as the top most on a vesa mount