Hello Monday:
0.Arrive late due to traffic.(Apparently a car hit a cow crossing the road)
1. Try upgrading php5 to php7 and break stuff in the process and waste 2 hours fixing things.(Poor connection so ssh sessions hung occasionally)
2.PHP fixed,open Gmail and get over 100 emails from clients about the server being down(because of (0)).Ignore all.Find a snaglist of over 20 TODOs.
3.Open Android Studio, update to 2.3 and everything becomes broken.Each time i open it ,it crashes and i have to "Report to Google"
4.Spend the next 1 hour reinstalling AS.It finally works.
5.Open Project and the libraries are broken.Spend another hour upgrading build tools.
6.Leave SDK to update and decide to check my Google Cloud console.$50 bill pending.Shit.
7.Try XCode. Remember the project is still in Swift 2 and I have to upgrade it(Would take eternity).Immediately closes xcode.
8.Gives up on life and decides to log into Devrant.

Just realized. The only use of port 80 (providing it runs something like NginX/Apache) is (or, should be anyways) redirecting users from a non-secure connection to a secure one.

Poor port 80 😖

Friend of mine killed his MacBook with some Softdrink.

Just poured it all over his poor a1502.

He let it dry for a few days, it starts to work again.
Except the battery.

Goes on Amazon and buys a new battery.

New battery doesn't work either and so he tells me about it and I as stupid as I am couldn't resist the temptation to finally work on a MacBook like my "hero" Lois Rossmann does.

So turns out the board is good.
Cleaned it up and basically nothing happened to it.

So what's the deal with "los batlerias"?

The first got hit by liquid, the second had a broken connection to a cell.
That could have happened through my friend, installing it without testing it first, or at the seller, so it being a DOA battery.

Now away from the stupidity of my friend and the situation to the actual source for this rant.

Once something happens to a modern Managed battery, the Battery Management System (BMS) disconnects the voltage from the system and goes into an error state, staying there and not powering anything ever again.
For noobs, it's dead. Buy a new one.

But It can be reset, depending you know how to, and which passwords were set at the factory.
Yes, the common Texas instruments BQ20Zxx chips have default passwords, and apple seems to leav them at default.

The Usb to SMBus adaptors arrived a few days ago and I went to prod the BMS.

There is a very nice available for Windows called BE2works, that I used the demo of to go in and figure out stuff. The full version supports password cracking, the demo not.

After some time figuring out how Smart Battery Systems (SBS) "API" works, I got to actually enter the passwords into the battery to try get into manufacturer and full access mode.

Just to realise, they don't unlock the BMS.

So, to conclude, my friend bought a "new" battery that was most likely cut out of a used / dead macbook, which reports 3000mah as fully charged instead of the 6xxx mah that it should have, with 0 cycles and 0hours used.
And non default access.

This screams after those motherfuckers scaming the shit out of people on Amazon, with refurb, reset, and locked fucken batteries.

I could kill those people right now.

Last but not least,
My friend theoretically can't send it back because I opened the battery to fix the broken connection.
Though maybe, it'll get send back anyway, with some suprise in the package.

I keep a backup of most installers because I have a poor internet connection.
Imagine my disappointment when one of them is just a downloader for the full installer.

Dear sweet merciful Lord, my API is WORKING! OMG! I take back everything bad I said about PHP. Turns out the connection to the database was causing the script not to run. I'll figure out why later but poor sweet PHP, is innocent.

How Real programmers code :

Pfff real programmers use a puppy and have it chase a frisbee where the frisbee hits a flower disrupting a bees honey sucking so it goes home to beat it's wife which again the wife bee gets pissed off and stings my dumb client who mashes some buttons on a keyboard by mistake whilst using my software which fucks up my program and I have to tell him that my program is fine and if he didn't try walking in the garden holding his laptop because of his poor WiFi connection then all of this wouldn't've happened.

So I was setting up ELK (Elasticsearch, Logstash and Kibana) all in one EC2 on AWS today for demo purposes. I had everything prepared. Elastic IP, correct security group rules, etc.

I figured I would just do quick test before writing filters and templates if I can access Kibana. So I started service for it and tried to open it with Chrome.

Timeout.

Checked config file. Compared it to documentation. Seemed good but changed some things just for sake of change. Restarted service.

Timeout.

Reverted changes I've made in config. Restarted service. Curl on localhost. It work... OK. 😐

It took me half an hour but finally I figured it out after I took my phone and opened it from there. It was working from the beginning. Stupid company network was for some reason blocking this connection. Fuck! 😡And I was restarting that poor service like crazy trying to fix something that wasn't broken.

Just got a message from a recruiter about a position in another state. I told her to relocate the incentive would need to be very high. She told me, "if I talk with them they might have some relocation package."

So, a couple of questions: How the fuck do you not immediately have that information? What is your actual job? What the fuck are you even doing right now if you can't answer basic questions about the position or give me a reason to be interested? Does some poor moron actually pay you for this shit?

Annnnddddd. Connection removed. Blocked.

what have I done to deserve this? 😫
the connection is so shitty I can't even rant about it properly... 😵

FUCKING WHY ME!

Lost my dedicated internet access due to a SHITSTAIN of an ISP TELIA decided to introduce itself to my connection A SECOND FUCKING TIME in the past YEAR.

Suddenly lost internet and my firewall couldn't figure out that it was supposed to lose all its fucking connections and renew it's IP adress.

Now im connected to this fucking hipe of shit that is the biggest giver of their customers information to anyone who asks, "Hey man, whats the dude who has this IP?, - sure fam, here you go"

Now i probably have some poor motherfuckers name attached to my current IP.

But could you say that i am now untraceable?

So I want to build myself a custom buttonbox for star citizen and warthunder, my hotas really doesn't have enough or fittingly placed buttons for either of those games. What would be the best approach for this?
My first thought was to take an arduino or some AVR chip on an USB connection and write a custom JoyStick driver but that would be a major pain on the buttocks.
Also would I buy an Arduino or go full custom stuff and buy some chip from TI and DIY the board completly?

On the other hand if I'm gonna tinker with stuff on my own time I propably should pick up an ARM processor so I get familiar with the architecture, but that's propably overkill.
But 8-bit AVR is so constrained so maybe if I want to expand and create something like an MFD the poor 8266 would propably just go up in flames.

Has anybody a better idea or knows some ready to rock board for this kinda stuff? Best case scenario with a Joystick driver or something?

Finaly I write my first rant about dev stuff.

My mom works as a shop clerk in the optic shop (they sell glasses). It is a small shop run by family buisness (not by my mom, she is only employed there). She had been constantly complaining about the poor pc performance and how the program there are using for inventory managment always hangs.
Her boss decided to "upgrade" the pc's by buing macs, but he was stopped by me and my mom. (I was helping them with some IT stuff so i had a bit of a influence over that).
The program they are using was written by some amateur programer that is a boss of a similar shop somewhere in the country.

So i recommended to them to install SSD's to speed up their pc's, and it did nothing. Of course i blammed the poorly written program next.

The program hangs when you type in the find field. I wanted to check if my gut feeling was right so i asked them to have task manager open when they type. And my feeling was right.

When you change anything in the text find bar, the program sends a crap ton of requests to the local server and that server sends a crap ton of packiets back, enough to saturate the local connection...

I will try to rewrite the app myself, just for the challenge of it. I want to check if i can write a better one than this one pos. They still want to buy better pc's but they wont be any help to them... Well i will help them with that anyway (having good pc's is good anyway). I hope i can create the app that will fix their problems...

Waiting for a new package to be installed on my raspberry pi takes a long time because of my poor internet connection :( But it is totally worth the long waiting time though!

Story, !rant.

So after previously telling the story of my laptop in the rain, I thought I should follow up with this one. (this is couple months later)

My laptop was bought second hand by my father (who doesn't know anything about computers) and the poor thing had a tendency to overheat. It worked fine, but under heavy load it would only last a couple minutes before it shut down.

So once I was cleaning out the fan (as dust accumulated in there) and I ran it under the tap, to get everything off. Sure, you might cringe at the idea but I thought some water wouldn't hurt it, especially after surviving en evening in the rain. So I cleaned it and let it dry.

A while later, when it finished drying I started to reassemble my laptop. After about 30 mins of fiddling with it, it was back together and ready for a fresh start! So I powered it on.

Sparks flew. Smoke started coming off the motherboard. More sparks.

😯

I pulled the cord. "Fuck, glad I caught it on time..."

I waited a while longer. Turn it back on. "Fan is not functioning properly or is missing". FML. After all it had survived, a bit of water in the circuit that made the fan spin is what took it down 😑

Fast forward two years (without a fan, shitty days), and I bought a second hand Lenovo laptop that I adore. So I thought I'd sell the laptop on Ebay, but first I should fix the fan so that I wouldn't have to sell it for next to nothing. Part number was hard to find, and bought it from somewhere in Europe. Four weeks later, the fan arrived at my doorstep.

Took the laptop apart (have I mentioned how hard that was?) and replaced the fan. Felt good to fix what I had ruined two years back. Put it back together (after applying thermal paste, I'm not a monster) and powered it on.

"Fan is not functioning properly or is missing"

😑

After checking the connection a couple times, I realized that what had given out was the motherboard connector for the fan, after the water incident. Wasted 40 dollars and several hours of my time for nothing.

The laptop that survived hours in the rain was taken down by a wee bit of water. So sad.

So I wonder if anybody on here has ever come across the LG G3 flickering screen issue.

I bought a LG G3 about 2 years ago. Fantastic phone.. Until all the issues started appearing.
First of all, the glass started lifting off on the left side of the phone, exposing the backlight layer, because the phone somehow managed to bend (insert iphone joke) inside my pocket. I was okay with it since it was a minor visual thing and didn't affect anything.
About 6 months ago the phone started lagging like crazy, and it kept getting worse and worse. It's so bad right now that Twitter will rarely fullscreen images, apps crash all the time, and occasionally the phone freezes to the point where it won't even react to the lock button.
About 2 weeks ago I started getting messages that my sim card was removed, and the phone starts rebooting itself. This would sometimes happen 10 times a day.
I was already pissed at all of these issues and in a desperate need of a new phone, but on Sunday a brand new issue appeared!
The phone's display randomly shut off, then wouldn't want to turn on, and occasionally turn on just to fade out or flicker away.
I of course went to google to see if anybody else has this issue... And it turns out that youtube is full of videos about it. Apparently the overheating issue these phones have slowly ruins the solder on the chips, which in turn creates a poor connection and causes these issues. The only way to solve it seems to be to reflow the chip, but others that tested that only got it to work for around 2 weeks before the issues started reappearing. I haven't tested it myself yet, but after disassembling, fucking around with it, and putting it all back together 3 times I sort of got it to work to the point where I can use it for several minuted before the displays fails. While writing this rant the display only quit on me once at the very beginning.

What I'm wondering is, why is it that nobody at LG decided to address the heating issue by perhaps throttling the CPU more? And I heard the G3 isn't the only LG phone with these issues?
This crap made me lose all my trust in the company. I wanted to upgrade to a G6 or V30, but because of this crap I think my next phone might be a Xiaomi.

This rant is now so long that it's barely even a rant or on topic. I think I should end it here since I have nothing more to say other than the LG G3 is a beautiful but crap phone, oh, and the new iPhone 8 is a flop

When I have to update my APIs and Libraries with my poor internet connection; Hence, cannot google for solutions for my problems while the download is going on because opening websites takes a shit load of time.