Windows 10 once again held my computer at ransom! When it finally came around after the update, all it really seem to do is place Edge back on my task bar. No... Bad Microsoft, I don't use or want Edge.

Buckle up kids, this one gets saucy.

At work, we have a stress test machine that trests tensile, puncture and breaking strength for different materials used (wood construction). It had a controller software update that was supposed to be installed. I was called into the office because the folks there were unable to install it, they told me the executable just crashed, and wanted me to take a look as I am the most tech-savvy person there.

I go to the computer and open up the firmware download folder. I see a couple folders, some random VBScript file, and Installation.txt. I open the TXT, and find the first round of bullshit.

"Do not run the installer executable directly as it will not work. Run install.vbs instead."

Now, excuse me for a moment, but what kind of dick-cheese-sniffing cockmonger has end users run VBScript files to install something in 2018?! Shame I didn't think of opening it up and examining it for myself to find out what that piece of boiled dogshit did.

I suspend my cringe and run it, and lo and behold, it installs. I open the program and am faced with entering a license key. I'm given the key by the folks at the office, but quickly conclude no ways of entering it work. I reboot the program and there is an autofilled key I didn't notice previously. Whatever, I think, and hit OK.

The program starts fine, and I try with the login they had previously used. Now it doesn't work for some reason. I try it several times to no avail. Then I check the network inspector and notice that when I hit login, no network activity happens in the program, so I conclude the check must be local against some database.

I browse to the program installation directory for clues. Then I see a folder called "Databases".

"This can't be this easy", I think to myself, expecting to find some kind of JSON or something inside that I can crawl for clues. I open the folder and find something much worse. Oh, so much worse.

I find <SOFTWARE NAME>.accdb in the folder. At this point cold sweat is already running down my back at the sheer thought of using Microsoft Access for any program, but curiosity takes over and I open it anyway.

I find the database for the entire program inside. I also notice at this point that I have read/write access to the database, another thing that sent my alarm bells ringing like St. Pauls cathedral. Then I notice a table called "tUser" in the left panel.

Fearing the worst, I click over and find... And you knew it was coming...

Usernames and passwords in plain text.

Not only that, they're all in the format "admin - admin", "user - user", "tester - tester".

I suspend my will to die, login to the program and re-add the account they used previously. I leave the office and inform the peeps that the program works as intended again.

I wish I was making this shit up, but I really am not. What is the fucking point of having a login system at all when your users can just open the database with a program that nowadays comes bundled with every Windows install and easily read the logins? It's not even like the data structure is confusing like minified JSON or something, it's literally a spreadsheet in a program that a trained monkey could read.

God bless them and Satan condemn the developers of this fuckawful program.

ANTI VIRUSES AREN'T ALWAYS YOUR FRIEND!

So I'm under a little pressure to get an assignment done so I came home an was planning on working on it but Windows had other plans and decided to finish its update which I suspect copied my hard drive and uploaded it to the NSA at dial up speed because it it forever!!

But anyway back to the text in caps lock... I started working on it then when I hit compile I got an "access denied" error in the console and didn't know what the f*** was going on. So I decided to copy my filed to another directory and tried again... amazingly this worked so I carried on and after about 2 hours I get the same error -_- So instead of messing around and loosing my work I decided to commit it... but I cant... again "access denied" error.

After threatening my computer with a trip out the window, I finally decided to reboot it... cause "have you tried turning it off and on again" kept on rattling in my head.

After logging in I tried again and still the same error... Then I opened up my anti virus dashboard and went through the logs and found the screen shot attached.....

3 rants for the price of 1, isn't that a great deal!

1. HP, you braindead fucking morons!!!

So recently I disassembled this HP laptop of mine to unfuck it at the hardware level. Some issues with the hinge that I had to solve. So I had to disassemble not only the bottom of the laptop but also the display panel itself. Turns out that HP - being the certified enganeers they are - made the following fuckups, with probably many more that I didn't even notice yet.

- They used fucking glue to ensure that the bottom of the display frame stays connected to the panel. Cheap solution to what should've been "MAKE A FUCKING DECENT FRAME?!" but a royal pain in the ass to disassemble. Luckily I was careful and didn't damage the panel, but the chance of that happening was most certainly nonzero.
- They connected the ribbon cables for the keyboard in such a way that you have to reach all the way into the spacing between the keyboard and the motherboard to connect the bloody things. And some extra spacing on the ribbon cables to enable servicing with some room for actually connecting the bloody things easily.. as Carlos Mantos would say it - M-m-M, nonoNO!!!
- Oh and let's not forget an old flaw that I noticed ages ago in this turd. The CPU goes straight to 70°C during boot-up but turning on the fan.. again, M-m-M, nonoNO!!! Let's just get the bloody thing to overheat, freeze completely and force the user to power cycle the machine, right? That's gonna be a great way to make them satisfied, RIGHT?! NO MOTHERFUCKERS, AND I WILL DISCONNECT THE DATA LINES OF THIS FUCKING THING TO MAKE IT SPIN ALL THE TIME, AS IT SHOULD!!! Certified fucking braindead abominations of engineers!!!

Oh and not only that, this laptop is outperformed by a Raspberry Pi 3B in performance, thermals, price and product quality.. A FUCKING SINGLE BOARD COMPUTER!!! Isn't that a great joke. Someone here mentioned earlier that HP and Acer seem to have been competing for a long time to make the shittiest products possible, and boy they fucking do. If there's anything that makes both of those shitcompanies remarkable, that'd be it.

2. If I want to conduct a pentest, I don't want to have to relearn the bloody tool!

Recently I did a Burp Suite test to see how the devRant web app logs in, but due to my Burp Suite being the community edition, I couldn't save it. Fucking amazing, thanks PortSwigger! And I couldn't recreate the results anymore due to what I think is a change in the web app. But I'll get back to that later.

So I fired up bettercap (which works at lower network layers and can conduct ARP poisoning and DNS cache poisoning) with the intent to ARP poison my phone and get the results straight from the devRant Android app. I haven't used this tool since around 2017 due to the fact that I kinda lost interest in offensive security. When I fired it up again a few days ago in my PTbox (which is a VM somewhere else on the network) and today again in my newly recovered HP laptop, I noticed that both hosts now have an updated version of bettercap, in which the options completely changed. It's now got different command-line switches and some interactive mode. Needless to say, I have no idea how to use this bloody thing anymore and don't feel like learning it all over again for a single test. Maybe this is why users often dislike changes to the UI, and why some sysadmins refrain from updating their servers? When you have users of any kind, you should at all times honor their installations, give them time to change their individual configurations - tell them that they should! - in other words give them a grace time, and allow for backwards compatibility for as long as feasible.

3. devRant web app!!

As mentioned earlier I tried to scrape the web app's login flow with Burp Suite but every time that I try to log in with its proxy enabled, it doesn't open the login form but instead just makes a GET request to /feed/top/month?login=1 without ever allowing me to actually log in. This happens in both Chromium and Firefox, in Windows and Arch Linux. Clearly this is a change to the web app, and a very undesirable one. Especially considering that the login flow for the API isn't documented anywhere as far as I know.

So, can this update to the web app be rolled back, merged back to an older version of that login flow or can I at least know how I'm supposed to log in to this API in order to be able to start developing my own client?

TL;DR: Fuck you Apple.

10:30 PM, parent needs iPhone update to update Messenger. How hard can this be?
Need to update iPhone from 9.x to latest, which is so outdated it still required iTunes. Fk.

Boot iTunes on Windows 10 pc that is at least 10 years old.
Completely unresponsive
Crash in task manager
Launch and is completely unresponsive. (Also starts playing unrequested music.. Oh joy..)
Fuck this, go to apple.com to download iTunes exe
Gives me some Microsoft store link. Fuck that shit, just give me the executable
Google “iTunes download”. click around on shitty Apple website. Success.
Control panel. Uninstall iTunes. (Takes forever, but it works)
Restart required (of fucking course).
2 eternities later. Run iTunes exe. Restart required. Fk.
Only 1 eternity later. Run iTunes, connect iPhone.
Actually detects the device. (holy shit, a miracle)
Starts syncing an empty library to the phone. Ya, fuck that.
Google. Disable option. Connect phone. Find option to update.
Update started. Going nowhere fast. Time for a walk at 1:00 AM punching the air.
Come back. Generic error message: Update failed (-1). Phone is stuck installing update. (O shit)
1x hard reset
2x hard reset
Google. Find Apple forum with exact question. Absolutely useless replies. (I expected no less)
Google recovery mode. Get into recovery mode.
Receive message: “You can update, but if it fails, you will have to reset to factory settings”. Fuck it, here we go.
Update runs (faster this time). Fails again. Same bullshit error message. (Goddammit, fuck. This might actually be bad.)
Disconnect phone.
… It boots latest iOS version. (holy shit, there is a god)
Immediately kill iTunes. Fuck that shit.
Parents share Apple account
Sign in, 2FA required.
Fat finger the code.
Restart “welcome” process.
Will not send code. What. The. Fuck.
Requests access code on other parent’s iPhone.
No code present. What???
Try restarting welcome process again. No dice. (Of course)
Set code on other parent’s iPhone.
Get message “Code is easy to guess”. Ya. IDGAF
Use code on newly updated iPhone. Some success.
Requires reset of password.
Password cannot be the same as old password (Goddammit)
Change password.
Welcome process done.
Sign in again on same phone after welcome process done in settings. (Nice.)
Sign in again on other phone with updated password
Update Messenger.
Update hangs. Needs more space.
Delete shit.
Update frozen in App Store (Really??)
Restart iPhone.
Update Messenger.
Update complete past 2. Well that was easy.

Apple, fuck you.
Some call Android unintuitive, but I look at the settings app on iPhone and realize you aren’t any better.
This company hasn’t been innovative since 2007. Over 1000 USD for a phone? Are you fucking kidding me?
Updating an iPhone from iOS 9.x is probably uncommon anymore. But this is a fucking joke. Fix your shit.
Shit like this is why I’ll never again own an Apple product. I have HAD IT with the joke of a business.

Thanks for reading.

I have a Windows machine sitting behind the TV, hooked to two controllers, set up as basically a console for the big TV. It doesn't get a lot of use, and mostly just churns out folding@home work units lately. It's connected by ethernet via a wired connection, and it has a local static IP for the sake of simplicity.

In January, Windows Update started throwing a nonspecific error and failing. After a couple weeks I decided to look up the error, and all the recommendations I found online said to make sure several critical services were running. I did, but it appeared to make no difference.

Yesterday, I finally engaged MS support. Priyank remoted into my machine and attempted all the steps I had already tried. I just let him go, so he could get through his checklist and get to the resolution steps. Well, his checklist began and ended with those steps, and he started rather insistently telling me that I had to reinstall, and that he had to do it for me. I told him no thank you, "I know how to reinstall windows, and I'll do it when I'm ready."

In his investigation though, I did notice that he opened MS Edge and tried to load Bing to search for something. But Edge had no connection. No pages would load. I didn't take any special notice of it at the time though, because of the argument I was having with him about reinstalling. And it was no great loss to me that Edge wasn't working, because that was literally the first time it'd ever been launched on that computer.

We got off the phone and I gave him top marks in the CS survey that was sent, as it appeared there was nothing he could do. It wasn't until a couple hours later that I remembered the connectivity problem. I went back and checked again. Edge couldn't load anything. Firefox, the ping command, Steam, Vivaldi, parsec and RDP all worked fine. The Windows Store couldn't connect either. That was when it occurred to me that its was likely that Windows Update was just unable to reach the internet.

As I have no problem whatsoever with MS services being unable to call home, I began trying to set up an on-demand proxy for use when I want to update, and I noticed that when I fill out the proxy details in Internet Options, or in Windows 10's more windows10-ish UI for a system proxy, the "save" button didn't respond to clicks. So I looked that problem up, and saw that it depends on a service called WinHttpAutoProxySvc, which I found itself depends on something called IP Helper, which led me to the root cause of all my issues: IP Helper now depends on the DHCP Client service, which I have explicitly disabled on non-wifi Windows installs since the '90s.

Just to see, I re-enabled DHCP Client, and boom! Everything came back on. Edge, the MS Store, and Windows Update all worked. So I updated, went through a couple reboots-- because that's the name of the game with windows update --and had a fully updated machine.

It occurred to me then that this is probably how MS sends all its spy data too, and since the things I actually use work just fine, I disabled DHCP Client again. I figure that's easier than navigating an intentionally annoying menu tree of privacy options that changes and resets with every major update.

But holy shit, microsoft! How can you hinge the entire system's OS connectivity on something that not everybody uses?

Alrighty, saturday morning rant time!

I just recieved a mail from one of my not-so-much-loved colleagues.

Now Background first: I work in IT-Support. We provide services for other companies. One of those services is monitoring servers and clients for various things. I recently took over the project (was assigned to do it) and restructured everything, wrote new scripts to test more stuff, successfully tested it internally and rolled it out over the last 2 weeks.

Now one of these scripts hooks into the Windows Update API and looks at the update history. It filters for known Windows Update Agent strings (UpdateOrchestrator, AutomaticUpdates and AutomaticUpdatesWuApp in case you also want to do something like this) and then looks for installation errors over the last 24 hours and wherever there have even been any successful updates over the last one and a half months.

Back to that mail.

My colleague sent me this lovely mail about a ticket i opened about his customers servers beeing all out-of-date on updates.

"This is all wrong, everything's fine. I disabled the checks."

...

It's on bitch.

So i logged on to my work PC via TeamViewer, opened my script, connected to the customer and was ready to debug the shit out of my script, knowing i probably won't even need to.

I looked at the update history via Windows Update itself and behold: 1st April. That's almost 50 days in the past.

So the script works, go figure.

Great, so search for new Updates then.
>None found.

Hm. What could it be? Did my super special colleague forget to care about his very special totally-needs-WSUS-customer WSUS again?

Yup.

Online-Search finds a ton of new Updates.

Screenshot, write pissed mail to colleague, re-enable checks, breakfast.

It all started with an undelivereable e-mail.

New manager (soon-to-be boss) walks into admin guy's office and complains about an e-mail he sent to a customer being rejected by the recipient's mail server. I can hear parts of the conversation from my office across the floor.

Recipient uses the spamcop.net blacklist and our mail was rejected since it came from an IP address known to be sending mails to their spamtrap.

Admin guy wants to verify the claim by trying to find out our static public IPv4 address, to compare it to the blacklisted one from the notification.
For half an hour boss and him are trying to find the correct login credentials for the telco's customer-self-care web interface.
Eventually they call telco's support to get new credentials, it turned out during the VoIP migration about six months ago we got new credentials that were apparently not noted anywhere.

Eventually admin guy can log in, and wonders why he can't see any static IP address listed there, calls support again. Turns out we were not even using a static IP address anymore since the VoIP change. Now it's not like we would be hosting any services that need to be publicly accessible, nor would all users send their e-mail via a local server (at least my machine is already configured to talk directly to the telco's smtp, but this was supposedly different in the good ol' days, so I'm not sure whether it still applies to some users).

In any case, the e-mail issue seems completely forgotten by now: Admin guy wants his static ip address back, negotiates with telco support.
The change will require new PPPoE credentials for the VDSL line, he apparently received them over the phone(?) and should update them in the CPE after they had disabled the login for the dynamic address. Obviously something went wrong, admin guy meanwhile having to use his private phone to call support, claims the credentials would be reverted immediately when he changed them in the CPE Web UI.

Now I'm not exactly sure why, there's two scenarios I could imagine:
- Maybe telco would use TR-069/CWMP to remotely provision the credentials which are not updated in their system, thus overwriting CPE to the old ones and don't allow for manual changes, or
- Maybe just a browser issue. The CPE's login page is not even rendered correctly in my browser, but then again I'm the only one at the company using Firefox Private Mode with Ghostery, so it can't be reproduced on another machine. At least viewing the login/status page works with IE11 though, no idea how badly-written the config stuff itself might be.

Many hours pass, I enjoy not being annoyed by incoming phone calls for the rest of the day. Boss is slightly less happy, no internet and no incoming calls.

Next morning, windows would ask me to classify this new network as public/work/private - apparently someone tried factory-resetting the CPE. Or did they even get a replacement!? Still no internet though.
Hours later, everything finally back to normal, no idea what exactly happened - but we have our old static IPv4 address back, still wondering what we need it for.

Oh, and the blacklisted IP address was just the telco's mail server, of course. They end up on the spamcop list every once in a while.

tl;dr: if you're running a business in Germany that needs e-mail, just don't send it via the big magenta monopoly - you would end up sharing the same mail servers with tons of small businesses that might not employ the most qualified people for securing their stuff, so they will naturally be pwned and abused for spam every once in a while, having your mailservers blacklisted.

I'm waiting for the day when the next e-mail will be blocked and manager / boss eventually wonder how the 24-hours-outage did not even fix aynything in the end...

Windows Update prompted me to install the 1809 update for Windows 10 recently.

I left the machine for a while and came back to find it frozen at a completely blank screen.

It eventually restarted...and got stuck in a continual loop where the Windows logo would flash for a second and then instantly restart again.

The restart occurred so early in the boot process that I couldn’t even get it into recovery mode or do anything with it to fix it.

So I had no choice but to reinstall Windows from scratch and reinstall and restore all my software and files. Took about 7 hours.

Not happy!

So I actually got an update for my PC at work, proposing me to postpone it or to do it later. I postpone it to one hour later, since I'll be buying food for lunch, it can update and reboot.

When I came back from lunch, laptop is asking me to postpone or do the update right now. So I sigh because the laptop just stayed locked without doing anything, and ask it to do the update in 4 hours, when I'll be leaving.

2 minutes later, it forces me to update with the "30 min left before rebooting", so I sigh again, closes everything and reboot.

Since it's a Windows, it's slow on booting by definition. Plus launching Slack, Eclipse, Firefox, VLC. Takes time. Plus launching the server. +1000 files to compile then deploying.

I lost 20 minutes because of that edgy bitch called "update".

!rant

So I have bought a new laptop and this time instead of straight up booting linux I had an idea of giving micro$oft a try, so I have decided to use only their services for 2 weeks.

To be honest, I really did not expect windows to use do much cpu and hdd during updates and background tasks, but after a day it was ok and windows feels snappier than during my last encounrer (maybe cause the new hw?).

I was even so dedicated that I started to use cortana and I have to tell, that she is dumb as fuck, since she fails to understand even the basic tasks and if u want something advanced, she refers to the next update. But boy, tell her to open Visual Studio and she asks if you want VS Code or Visual Studio, which seems great. But my response was 'Code' then she insisted that I said Coke. Im like OK, Im not native english speaker, lets try Visual Studio Code, where she told me that there is no such thing and Spelling VS - Code ended me in bing search for Unesco :/

I really want to like Cortana, she has nice name, nice history, but she is like that A girl from class, who looks gorgeous, has great voice, but then u reallise that she just eats a book before exam and after that she is that dumb basic hoe.

I also gave a shot to Bing and Edge. Bing is something between Google and DuckDuckGo, since it gives you a liiitle less results from search history, yet if you want to find something in different language its even possible to tell you that what are you trying to find does not exist.

But I have to tell, that I like Edge and I mean it. Like... Its fast and has some good features, like pushing all your open tavs away, so you can open them Later. It also does not have that stupid ass feature that lets you control tab from left to right, not by chronological order, so you wont end up in infinity loop of 2 tabs. And even if people make fun of M$ trying to convince you to use Edge by being too aggresive. God go on edge and try to use some Google Service(You still dont use chrome?!).

I also tried to play with .Net core and I have to tell that against java they are a bit further. I liked some small features, but what I just simply loved was rhe fucking documentation. You basically dont need google, sincw they give you examples and explain in a human way.

What I didnt quite get was the 'big' Visual Studio. Tje dark theme to me feels strange(personal and irrelevant). Why the hell I do need to press 2 shortcuts to duplicate line?! Why is it so hard to find a plugin to give me back my coloured brackets and why the fuck it takes like a second to Cut one line of code on a damn i7?!

Visual studio Code was something different. It shows how dark theme should be done, the plugin market is full of stuff and the damn shortcuts are not made for octopi. So I have to recommend it ^^.

I even gave a shot to word and office as a whole and fuck I never knew that there are so many templates. It really made my life easier, since all you need to do is find the right one in the app, instead of browsing templates online, where half of them are for another version of your text editor.

Android Launcher was fast, had a clever widget of notes and the sync was pretty handy to be honest so I liked that one as well.

What made me furious was using the CLI. Godfucking damn what the fuck is ipconfig?! :/

Last thing what made me superbhappy was using stuff without wine and all of the addional shit. Especially using stuff like Afinity Designer and having good looking apps in general. I mean Open source has great tools l sometimes with better functionality. But I found out, that what is pleasure to look at, is pleasure to work with.

To Summarize a bit.

It wasnt that bad as I expected. I see where they are heading with building yet another ecosystem of It just works and that they are aiming at professionals once again.

So I would rate it 6/10, would be 7 if that shit was Posix compatible.

I know that for Balmer is a special place in hell... But with that new CEO, Microsoft at the end may make it to purgatory..

After 5 frustrating days, I have my laptop running again. Just in time for a data structures and algorithms exam.
TL;DR: driver issues aren't fun.

It all started on Friday, after the creators update. I was doing notes on lectures, and Windows crashed. I thought not much of it, it was just a "random" crash. I'd gotten a similar crash before, but I didn't think anything of it. This time was different, again it was my touchpad drivers that caused the issue, but this time a restart didn't work. I couldn't boot into Windows. I had to roll back to the last recovery point, effectively undoing the update.
This was fine, and fixed the issue, until Windows automatically updated my touchpad again, after me previously changing the driver. Another restart later and I couldn't boot. Time to roll back to recovery, right? Wrong. My drive had somehow, corrupt most of the Windows files.
And so, starts the journey of dismantling my laptop, changing the hard drive and putting it back together, a process that took 3 days due to not having the correct tools originally, and a late delivery.
(I could have rolled back to my backup system image, but that was before the creators update, and would have essentially postponed the issues I was having)
Finally, I managed to get Windows loaded from boot media (thankfully, they seem to tie your Windows licence to your account now) and am currently in the process of regaining all my lost files (which I have to pull from a system image, so it's a lot of digging through compressed files).
On a positive note, things are running well, and the faster hard drive (7200rpm vs 5400rpm) is a nice upgrade. And the touchpad drivers (the same one that kept crashing) haven't caused any problems since.
Now at least, I can get back to programming :D

Today, I have installed/uninstalled a combination of [windows 7, arch linux, dual-boot] a total of 9 times...

I wouldn't be surprised if my 120G SSD fails next week

It all started when I had to whip up a GUI-wrapped youtube-dl based program for a windows machine.

Thinking a handy GUI python library will get it done in no time, I started right away with the Kivy quick-start page in front of me.

Everything seemed to be going fine, until I decided it would be "wise" to first check if I can run Kivy on said windows machine.

Here I spent what felt like a day (5 hours) trying to install core pip modules for kivy.. only before realizing my innocent cygwin64 setup was the reason everything was failing, and that sys.platform was NOT set to "win32" (a requirement later discovered when unpacking .whl files)

"Okay.. you know what? Fuck........ This."
In a haze of frustration, I decided it was my fault for ever deciding to do Python on windows, and that "none of this would've happened if I were installing pip modules on a Linux terminal"...

I then had the "brilliant" idea of "Why don't I just use Linux, and make windows a virtual machine within, for testing."

And so I spent the next hour getting everything set up correctly for me get back to programming.... And so I did.

But uh... you're doing GUI stuff, right? -> Yeah...

And you uh.. Kivy uses OpenGL on windows, doesn't it? -> Yeah..?

OpenGL... 2.

-> Fuck.

That's when I realized my "brilliant" idea, was actually a really bad prank. Turns out.. I needed a native windows environment with up-to-date non-virtual graphics drivers that supported at least OpenGL2 for Kivy GUI programs!

Something I already had from square 1.

And at this point, it hurts to even sigh knowing I wasted hours just... making... poor decisions, my very first one being cygwin64 as a substitution for windows cmd.

But persistent as any programmer should be in order to succeed, I dragged my sorry ass back to the computer to reinstall windows on the actual hardware... again.

While the windows installer was busy jacking off all over my precious gigabytes (why does it need that much spaaace for a base install??? fuck.). I had "yet another brilliant idea" YABI™

Why not just do a dual-boot? That way, you have the best of both worlds, you do python stuff in Linux, and when it's time to build and test on the target OS, you have a native windows environment!

This synthetic harmony sounded amazing to the desperate, exhausted, shell of a man that I had become after such a back-breaking experience with cygwin

Now that my windows platter with a side of linux was all set-up and ready-to-go, I once again booted up windows to test if Kivy even worked.

And... It did!

And just as I began raising my victory flags, I suddenly realized there was one more thing I had to do, something trivial, should take me "no time" to do, being in a native windows environment and all.................... -.- (sigh)

I had to make sure it compiles to a traditional exe...

Not a biggy, right? Just find one of those py2exe—sounding modules or something, and surprisingly enough, there was indeed a py2exe—sounding module, conveniently named... py2exe.

Not a second thought given, I thought surely this was a good enough way of doing it, just gonna look up the py2exe guide and...

-> 3 hours later + 1 extra coffee

What do you meeeeean "module not found"? Do I need to install more dependencies? Why doesn't it say so in the DAMN guide? Wait I don't? Why are you showing me that error message then????

-------------------------------

No. I'm not doing this.
I shut off my computer and took a long... long.. break.

Only to return sometime the next day and end up making no progress, beating my SSD with more OS installs (sometimes with no obvious reason to do so).

Wondering whether I should give up Kivy itself as it didn't seem compatible with py2exe.. I discovered pyInstaller, which seemed to be the way Kivy wants exe's to be made on windows..

Awesome! I should've looked up how Kivy developers make exe's instead of jumping straight into py2exe land, (I guess "py2exe" just sounded more effective to me then)

More hours pass, and you'd think I'd have eliminated all of my build environment problems by now... but oh, how wrong you'd be...

pyInstaller was failing, and half the solutions I found online were to download some windows update KB32946..whatever...

The other half telling me to downgrade from Python 3.8.1 to Python 3.8.0000.009 (exaggeration! But you get the point)

At the end of all that mess, I decided it wasn't worth some of my lifespan, and that maybe.. just maybe.. it would've been better to create WINDOWS GUI with the mother fuc*ing WINDOWS API.

Alright, step 1: Get Visual Studio..
Step 2: kys
Step 3: kys again.

I feel like writing or telling people about the time I jumped from Windows 7 Ultimate and jumping to Windows 10. (I'm not against 10, but I'm never updating after what had happened to me)
It all starts when none of my games will play due to a possible issue with my graphics card. I look up "3D source game bug" and not many results pop up. I go on Microsoft's Qna areas and ask this question but to my surprise nothing they say would make sense. "Clean the pins of your graphics card, make sure you verify the games on Steam". I verified the games and they checked out as perfectly fine. I don't have access to my graphics card because this is a laptop, sadly not a tower.
Two months pass and my computer is already showing signs of stress, like it didn't want to live in a sense. It was three times slower than when I was on Windows 7 and it was unallocating areas of my main hard drive where I could make virtual hard drives.
Instantly I start looking up Linux distros and find Linux Mint. 17.3 was the current version at the time. I downloaded it and burned it onto a DVD-rom and rebooted my computer. I loaded into the disc and to my surprise it seemed almost like Windows 7 apart from the Linux part. I grab my external hard drive and partition it to hold the Linux distro and leave it plugged in incase Windows 10 does actually fail.
On December 19, a few months after Windows 10 had released. I start my laptop to try and continue my studies in video game development. But to my surprise, Windows 10 had finally crashed permanently. The screen flickered blue and black, and an error box saying Loginui.exe failed to start. I look at it for a solid minute as my computer had just committed suicide in a sense.
I reboot thinking it would fix the error but it didn't. I couldn't log in anymore.
I force shutdown the laptop and turn it back on putting it into safe mode.
To my surprise loginui.exe works and I sign in. I look at my desktop, the space wallpaper I always admired, the sound files, screen shots I had saved.
I go into file explorer and grab everything out of my default hard drive Windows was installed on. Nothing but 400gb got left behind and that was mainly garbage prototypes I had made and Windows itself. I formatted my external hard drive and placed everything on it. Escaping Windows 10 with around 100GB of useful data I looked at the final shutdown button I would look at.
I click it and try to boot into normal Windows 10. But it doesn't work. It flickers and the error pops up once more.
I force it to shutdown and insert the previous Linux Mint disc I made and format the default hard drive through Linux. I was done. 10 gave me a lot of shit. Java wouldn't work, my games has a functional UI but no screen popped up except a black abyss and it wouldn't even let me try to update my graphics card, apparently my AMD Radeon 5450 was up to date at the AMD Radeon 5000's.
I installed Linux Mint and thinking the games would actually play I open steam and Launch Half-Life 2 to check if Linux would be nicer to me than Windows 10 had been.
To my surprise the game ran. The scene from Highway 17 popped on screen and the UI was fully functional. But it was playing at 10-15fps rather than the usual 60-70fps. Keep look at my drivers and see my graphics card isn't in use. I do some research and it turns out I have a Hybrid Laptop.
Intel HD Graphics and an AMD Radeon 5450 and it was using the Intel and not the AMD. Months of testing and attempts of getting the games to work at high frame rates pass and the Damn thing still functions at a low terrible fps. Finally I give up. I ask my mom for a Windows 7 disc and she says we can't afford it. A few months pass and I finally get a Windows 7 installation disc through money I've saved up. Proudly I put it into my optical disc drive and install it to my main hard drive deleting Linux completely. I announced to all my friends my computer was back in working order and I install everything I needed, Steam, Skype, Blender, and Unity as well as all my games. I test Half-Life 2 and it's running exceptionally smoothly, I test Minecraft at max settings and it's working beautifully. The computer was functioning properly once again and my life as a developer started as I modeled things and blender, learned beginners C# and learned a lot of Batch. Today the computer still runs at a great speed and I warn others of what happened to me after I installed Windows 10 to my machine if they are thinking of switching from 7 or 8 on an older machine.
Truly the damage to my data cannot be undone. But the memory of the maintenance, work, tests, all are a memory of how Windows 10 ruined me and every night before the one year anniversary of Windows 10's release, I took out the battery of my laptop and unplugged it from the a.c. power, just so Windows 10 doesn't show it's DLLs, batch scripts, vbs scripts, anything on my computer. But now, after this has happened and I have recovered, I now only have a story to tell

Stupid Windows Update back at it again with the Fall Creator's Update. More like Fail Creator's Update. My poor laptop took it too hard and the built-in mobile hotspot feature is currently bugged and not working, with the ICS service in task manager stuck at 100% you usage. Restore to previous version or not to restore to previous version? That my friends is the question. *picks up Ubuntu 17.10 live disk*

I. Hate. Windows. Apps. UGH.

I may never be able to play FS2020 from the Xbox Game Pass again as... Its unable to install, gives a helpful 0x1 error code, and the help page link goes to a 404.

Now, I caused this myself... Partially... Er, no, fully, but I had a good reason!

I wanted to install something larger again and didn't have enough disk space. Fired up WinDirStat and there was a huge, like... 45 GB file in C:\Program Files\WindowsApps\Somedir\

Googling around, I found some people saying its a temp file so that Windows Store could reserve enough space for the app instalation... Okay, so... It got stuck, and I had no way to remove it?

Of course I didn't want to remove all apps of the windows market... So, I did something any *sane* person would never do - Took ownership of the whole WindowsApps and gave myself full control. Then I removed the file and... FS2020 never launched again.

I couldn't even uninstall it! It would give me no error either. It just lagged and then did nothing.

I tried resetting all the ACLs, tried giving ownership back to TrustedInstaller, nothing worked. Failed on some of the files, wtf?

Launching the game only ever told me there was an update in progress.

Tried booting a windows iso image and fix the ACLs from there, nope, also failed for the same bunch of files of FS2020. (Permission Denied while on a live image? Wow)

Last resort, I booted up Linux and tried removing the offending folders from there, only to find out that... Huh. The NTFS module labelled the offending folders as... broken links leading to an "unsupported reparse point". But hey, it let me remove it at least.

Since then, it no longer appeared as installed, but... Now, anytime I want to install it, it just throws an error 0x00000001 with no further details.

So yeah, I know I caused this myself, but after fiddling with the permissions and ACLs and NTFS dark magic, I feel justified in saying - Fuck you WindowsApps DRM.

I've always been a strong critic of the mac operating system and apple in general for they're overpriced products. few months back my old laptop kicked the bucket and repairing it was not an option as i was sick of charging the laptop after every 3-4 hours and had to purchase a new laptop immediately. loooking at my options around 50k rs or 700$ all windows laptops available in indian markets sucked (except for lenovo 320s) so i made the shift to macbook air 2017.my daily work involves photoshop illustrator and a dash of premiere pro. I also work on nodeJS and python using the pycharm and atom IDEs. After using it for a month i feel in love with mac platform and macos. Its a wonderful experience. gone are the days of crashes and the windows updates (ugh). the boot of the laptop is like magic and softwares like wmware imovie and notes keynote are f**king awesome. Long hours of work have become fun rather than hell dealing with constant windows gimmicks and bad battery optimisation on linux.

An explanation why all developers (except for the ones who require high powered gpus) graphic designers should shift to macos rn.

Advantages of using mac

No forced updates update whenever now or a f'ing month later no probs.
better battery optimisation than linux
no more installing os again and again (ubuntu)
better vm than virtualbox (vmware)
terminal for running bash commands
no crahes
Xcode platform
trackpad is worlds better than the best windows trackpad

Disadvantages

some softwares not available for macos
storage is generally less on macbooks
UI is simple (less elaborated than windows)

Workarounds

get a vm and install linux(vmware fusion 8)
ps. u may not need it though
wine and wine bottler for using windows apps
get a microsd to sd adapter for macbook and expand storage

Fucking windows updates...

Went to do a job on a tank in 18 deg F Weather with snow on the ground. One guy brought an ice fishing tent (very nice). This is next to petroleum tank. We got guys on top of tank waiting for me to get data using a Windows 10 lappy.

Lappy comes up and tries to get into bios to do a firmware update. WTF! I reboot and it does it again! Go to look for power adapter as it wont do update without power. Not in bag. It has to have power to do update.

So I drive back to shop (with guys waiting on top of tank) which is 5 miles away. I am pissed. Its snowing and I have to drive slow. I find that adapter. I get back to the tank and plug it in. The AC source (battery based) starts alarming as the lappy takes too much power. Fuck! But somehow it boots Windows without doing firmware update. Fuck you Windows!

I get my job done, but don't fucking trust windows at all. Had this been a field tech he would be pissing his pants. Useless shitty software you have zero control over. Now considering changing their OS to Linux for field work. I am rewriting their software anyway with something can run Windows or Linux.

Update on my OneDrive story from a bit back:
(this first part happened a while ago but I forgot making a post)
So I was still having problems with my OneDrive since the email from customer support didn't help at all. I replied saying that their advice wasn't helpful in any way and that I, as an IT student, am familiar with how to delete files. I got another reply.
Great right.
But what did this email say?
It basically explained me how to upload files and stuff and how the sync system works and such. One thing that was in there that might have worked was resetting the 'app', the thing is I wasn't using their windows 10 desktop app but something that I got when installing my windows.
Needless to say, I replied again, saying that I had hope in their app solution but that I (as I stated in a previous email) use a different application so it was all useless.

I GOT ANOTHER EMAIL:
It is actually a technical solution (or so it seems). You must be thinking "wow, he finally got trough the shitty first line support" I know right?! and it feels good.
Well, the 'technical' solution is basically uninstalling onedrive trough cmd prompt and then reinstalling it from the website.
The folder remains in the browser client of OneDrive but I'm going to learn to live with it.
At least my sync issue is gone.
That only took like 3 months and ended with a very silly solution that is way too straightforward causing me not to think about it :p
Thanks for the read.

OK, so, I see PY files shared on GitHub. All I know is, it is code for certain apps or pages. I download SEVERAL DIFFERENT PROGRAMS trying to get PY to open. Some didn't work, others were in Console and not Form. I asked for help on the Forum, how to open it, they do the same BS; gave me a Console app that just stays black for less than a second, and closes. I ask for a Form version. They made the excuse that it wasn't a program like I was thinking. They rudely tell me to be polite, but something like this IS GOING TO HAPPEN if they can't get their crap working. Eventually, after I TOLD THEM I WAS FURIOUS, THEY HIDE MY QUESTION FOR 10 MINUTES. When I replied, I DID NOT CUSS, I REPLACED LETTERS WITH ASTERISKS AND SYMBOLS, AND STILL GOT SUSPENDED, FOR A MONTH, AFTER TELLING THEM I WAS FURIOUS.

On the other hand, I was using Audacity. I upgraded and a plugin stops working. I thought they messed something up, so I wait using the outdated version for the fix for a few months, and so a few months later I update again, at this point I was a little upset; 2nd update and it still doesn't work. After the 3rd time, I thought they just didn't want to take the time and fix it, as people probably would have reported it by then. So I rant on Audacity's Forum saying they didn't fix an error, showed them screenshots in all versions I got and the 3 newest ones show an error. THEY TOLD ME WHAT WAS WRONG! I was trying to run a 32-Bit plugin on a 64-Bit version! I downloaded a 32-Bit version of the newest Audacity, and the plugin worked fine.

Python could've done what Audacity did, but, "No-o-o, we enjoy banning Winston when he is peed off!" And just so, the Suspension ends a day after my Birthday.

I might just ask when I'm back on, "How to remove my user off this Forum", so they can say "I can't", and flag it as malware because I almost no longer want they're help, and CAN'T GET AWAY FROM IT.

Freak you in the butt, Python.

PS - If anyone knows how to use Python files in Windows 10 or know a free, non-demo program that will more-advancedly edit, save, open PY files in a Form, please, give me the name or link to the software, program or app in the comments.

Before anyone says anything, this page says "Rant", so don't ban this or I'm deleting my account. If this isn't a "Rant" site, please tell me, and/or rename this site.

That is the reason I came here, just to get my frustration out.

I love linux because i dont have to forced to do frickin update like windows did.
Because i have an experience after update linux mint i cant even start the main GUI program. After boot only show blank console. It seem linux update broke the compatibility between my graphics card.
At least now i dont have to update because thats an option. The output of update is not different than windows.there is a chance you broke your OS.
But the struggle is when i need to install new app in linux. Sometimes need more than hour to find out why it doesnt work from the first time.
Any help here?
So this start from the office. In the office i usually use low spec laptop that work slowly. Then i found this IDE called rapidclipse. Its very promising with GUI builder and can build cross platform mobile app using only java built on top vaadin framework.
When i use it on low spec laptop hackintosh at office it work well although it take more time than other kind of eclipse and i dont need to install any kind of app again, just download-install-create new project-run on tomcat-work well.
Then i go to home to try this new tool , IMO my low spec PC still have more power to run something than old hackintosh. Because usually i use android studio with no problem. In the old hackintosh it went too long to build gradle only.
Then i install rapidclipse, then run desktop shortcut. Then it said i need to install correct java to use correct JavaFX.
After search on SO they said i must install jdk from oracle.
Ok so i got openjdk in my linux.wtf what is the different idk but dont have time to find out.
I install jdk from oracle.
Than finally can open the rapidclipse.
Wow , this gonna be fun.
Then create new project. Just a new project.
So im waiting. I see the progress at 10%. But still no increment on that.
I switch to other app for several minutes.
Then when switched back th app still at 10% and now is at no responding state. So i force close.
After that open rapidclipse again.
The previous new project can be opened. Yay, i think.
But so many error there. Omg.
So i create new project again.
But, but, i just repeated the first error then close again then try it again for several time. But still same output.
After an hour, i give up.
But still, why , just why it work like this. No error or whatsoever.
Back later i have a problem like this on different app.
Idkwhy.

I have been working on a long time, low progress project of mine that keeps on giving and giving.

Let's begin like two years ago where I dipped my toes into "more then gigabit" networking thanks to a Linus Techtips video about infiniband.
I had the dream of booting my Workstation from my NAS, a so called diskless setup.

Well, since I run FreeNAS on my Nas , a very nice Freebsd based Nas OS, everything's gonna be good.

In the beginning, there was no infiniband support.
Turns out, you don't need it, since the mellanox CX2 nics can do ETH too.
Yay.
Just took me a few weeks of anger.

So, to be able to boot something over the network, you need firmware that finds the bookable stuff and loads it.
That protocol and firmware is called PXE.
PXE needs a DHCP telling it what to do, and what is where and etc.

Freenas here I come! Installing dnsmasq on the actual freenas install turned out to be not that great of an idea because freenas thinks of itself as being an "appliance" that you don't fiddle with. So things work, until you update/ upgrade when everything will basically be wiped, except what you have done through the ui.
Ok. So I gona use a jail, a container like thing for that.
Everything is great, jail has internet, everything Installs fine, what could go wrong?
Dnsmasq can launch and work, but not as dhcp server. Some thing about permissions.
Turns out, jails have permission like things.
A few days of head scratching later, it has ALL the permissions.
Dnsmasq still can't work as DHCP server though, why you ask?
Because it needs a specific kernelmodule that isn't contained in the jail. Since jails are kind of like a docker container, they run on the same OS kernel, who does not have this module, I'd need to patch the freenas, which is an appliance, so fuck that.

Like a year later, freenas has finally added good VM support, so why not make a VM for the dhcpserver?

Well, about a year ago, I didn't know that the virtual Intel nic is a fucken unstable piece of garbage, crashing nearly any OS at some point.

So that was it for a while again.

Now to the last few weeks.
Finally dnsmasq is running in a freebsd VM with a good and working configuration which is rather simple, if those tutorial fuckers out there would explain shit instead of just telling you to copy, paste and replace X.

Now back to the PXE side.
I'm using iPXE because I have no clue how to boot anything over tftp so iSCSi it is, since that is what I can relate too.
The idea behind iscsi is to fake a SCSI disk over the network. Attached devices appear as if they are actually directly connected to the machine instead of over the network.

iPXE gets a lease from the server, can connect to it, everything is fucken great. Finally.
Except that if it "sanBoots" the iscsi drive, it can't find anything to boot.
Well fuck.
If I attach a Linux live USB over iscsi, it boots, finds grub, and crashes because the live iso isn't configured for network-boot.
But it boots.
So what's so different?

Well iPXE is booted in legacy mode, where as the content of the target is windows 10 in efi mode.
Ffff.

Ok. Can I get iPXE to boot in EFI mode?

Well yes, after like 3 days fiddling with it.
But it only finds the onboard Intel nic instead of the new Mellanox CX3 cards, and can't even connect to the target....

Sooo, I guess my options are as follows.
Either, get PXE efi to work on the network cards directly, its called flexboot and might be able to since I just found some firmware options for that.

Or give up on efi and install windows in legacy mode.
Which isn't that easy when it has to end up on a drive on my nas.