My friend called me up once saying the new mouse he bought to use with his laptop wasn't working.
I told him to just plug it into the usb port and it should just work immediately.
After an hour of trying shitload of things I finally gave up and said I'll come over and have a look.

And there was his mouse.

Connected to a phone charger.

To a wall outlet.

Hello everyone, found this place recently, decided to bore you with one (or many) Navy story... tech Navy story. I'll start from the end.
Little backstory: I've deployed a simple domain setup on the ship I served, nothing fancy, a server, a switch, 10 computers, all Windows (details on that at another rant). I enter the ship Monday morning, and the XO tells me that he can't access his online folders.
OK, I say, I'll get to it. I fire up my laptop, try to RDP to the server (I know, I know, burn me at the stake later) no connection. WTF? Is the service down? I try pinging. No luck. I tried pinging the switch. OK. Looking at the switch admin panel, I see the server's port is dead. "OK, probably the cable." (we have old ethernet cables)
So, I drag my ass over to the server (same room with ship comms) with the cable tester to confirm that. What do I see?
The IMBECILES had pulled the plug from the server so that they could charge their mobile phones. I literally slammed my head against the door (calming exercise in case of spontaneous murder impulses - the things you learn at the Academy). My CO was nearby, and lucky for the guys, he heard me yell at them, while throwing mobiles and chargers around.
"But we thought it was OK, we just wanted to charge our-"
I kid you not, I reached for the firefighter's axe.
My CO grabbed me by the collar and dragged me to his room. I explained to him (between two cigarettes) that we MUST get a UPS and a server cabinet (budget constraints in the military are something that will give you people nightmares, trust me). I carefully explained to him that unless we got those, nothing would prevent the next moron from destroying confidential data and me from murdering him.
I plugged in and booted the server, after installing a multi socket extension. Two days after, surprise surprise, the server was off again. That was the first time I opened the door to the CO's room with a low kick. I must have looked like a psycho on drugs, he gave approval for the purchase in twenty seconds flat.
After that, I installed the UPS and the cabinet. Everything went inside, from the UPS to the very plugs. Just a locked box with cables coming out.
One of the guys came to my room, and asked if I could unlock the cabinet so that they could plug a "device" they needed.
I actually reached for my folding knife.
Disclaimer: The story above is TRUE. Even the almost violent parts.

First time poster here. Please be nice :)

My biggest workaround is one that's being currently deployed to 40 truck drivers (trucking company here), preventing printers being out of usage while on the road. We also have to use HP ePrint to wirelessly print documents, but that's another story for another time I guess :)

CEO asked us to install wifi printers in our 40-ish trucks which has wifi on board. However he's always picking one of the cheapest options possible, so we got consumer grade printers (Laserjet 1002w). Those printers often disconnects without getting back on the truck wifi network EVER. I have to get physically in the truck, wire the printer via USB onto my laptop and reconfigure Wifi on it with the HP Windows tool. This means lots of printer downtime, which always happens when the drivers are three timezones away from our office

Then I thought: "What if I could sniff what HP sends via USB while I (re)configure the printer, and replay whats being sent later? Our trucks all have an Android tablet with a USB type-A connector with host capability, so I could write a small app that replays the config when plugged in by the user.

Three days of hacking around later, I have a working app. By chance, HP printers (or at least those models we have) uses HTTP POST via USB, so I could easily replay the request.

Edit: the end result is that truck drivers just plug the printer to their tablet, press "reconfigure" in a home made Android app, printer is reconnected to the truck and they're good to go. They don't have access to the network nor know enough to debug themselves anyways

My friend: OMG OMG OMG My laptop is dead!
Me: What do you mean it's dead? It doesn't even turn on?
My friend: Nooo, it does nothing?
Me: Are you sure it's plugged in?
My friend: Yesss
Me: You sure?
My friend: Yess, it's actually plugged into a multiple socket thingy...
Me: And that thing is plugged in to the wall..?
My friend: Well duh!
Me: And did you turn the switch on?
My friend: Of course I....oh, wait!! Never mind!!!!!
Me: >:/

So this was a couple years ago now. Aside from doing software development, I also do nearly all the other IT related stuff for the company, as well as specialize in the installation and implementation of electrical data acquisition systems - primarily amperage and voltage meters. I also wrote the software that communicates with this equipment and monitors the incoming and outgoing voltage and current and alerts various people if there's a problem.

Anyway, all of this equipment is installed into a trailer that goes onto a semi-truck as it's a portable power distribution system.

One time, the computer in one of these systems (we'll call it system 5) had gotten fried and needed replaced. It was a very busy week for me, so I had pulled the fried computer out without immediately replacing it with a working system. A few days later, system 5 leaves to go work on one of our biggest shows of the year - the Academy Awards. We make well over a million dollars from just this one show.

Come the morning of show day, the CEO of the company is in system 5 (it was on a Sunday, my day off) and went to set up the data acquisition software to get the system ready to go, and finds there is no computer. I promptly get a phone call with lots of swearing and threats to my job. Let me tell you, I was sweating bullets.

After the phone call, I decided I needed to try and save my job. The CEO hadn't told me to do anything, but I went to work, grabbed an old Windows XP laptop that was gathering dust and installed my software on it. I then had to build the configuration file that is specific to system 5 from memory. Each meter speaks the ModBus over TCP/IP protocol, and thus each meter as a different bus id. Fortunately, I'm pretty anal about this and tend to follow a specific method of id numbering.

Once I got the configuration file done and tested the software to see if it would even run properly on Windows XP (it did!), I called the CEO back and told him I had a laptop ready to go for system 5. I drove out to Hollywood and the CFO (who was there with the CEO) had to walk about a mile out of the security zone to meet me and pick up the laptop.

I told her I put a fresh install of the data acquisition software on the laptop and it's already configured for system 5 - it *should* just work once you plug it in.

I didn't get any phone calls after dropping off the laptop, so I called the CFO once I got home and asked her if everything was working okay. She told me it worked flawlessly - it was Plug 'n Play so to speak. She even said she was impressed, she thought she'd have to call me to iron out one or two configuration issues to get it talking to the meters.

All in all, crisis averted! At work on Monday, my supervisor told me that my name was Mud that day (by the CEO), but I still work here!

Here's a picture of the inside of system 8 (similar to system 5 - same hardware)

Navy story time, and this one is lengthy.
As a Lieutenant Jr. I served for a year on a large (>100m) ship, with the duties of assistant navigation officer, and of course, unofficial computer guy. When I first entered the ship (carrying my trusty laptop), I had to wait for 2 hours at the officer's wardroom... where I noticed an ethernet plug. After 15 minutes of waiting, I got bored. Like, really bored. What on TCP/IP could possibly go wrong?
So, scanning the network it is. Besides the usual security holes I came to expect in ""military secure networks"" (Windows XP SP2 unpatched and Windows 2003 Servers, also unpatched) I came along a variety of interesting computers with interesting things... that I cannot name. The aggressive scan also crashed the SMB service on the server causing no end of cute reactions, until I restarted it remotely.
But me and my big mouth... I actually talked about it with the ship's CO and the electronics officer, and promptly got the unofficial duty of computer guy, aka helldesk, technical support and I-try-to-explain-you-that-it-is-impossible-given-my-resources guy. I seriously think that this was their punishment for me messing around. At one time I received a call, that a certain PC was disconnected. I repeatedly told them to look if the ethernet cable was on. "Yes, of course it's on, I am not an idiot." (yea, right)
So I went to that room, 4 decks down and 3 sections aft. Just to push in the half-popped out ethernet jack. I would swear it was on purpose, but reality showed me I was wrong, oh so dead wrong.
For the full year of my commission, I kept pestering the CO to assign me with an assistant to teach them, and to give approval for some serious upgrades, patching and documenting. No good.
I set up some little things to get them interested, like some NMEA relays and installed navigation software on certain computers, re-enabled the server's webmail and patched the server itself, tried to clean the malware (aka. Sisyphus' rock), and tried to enforce a security policy. I also tried to convince the CO to install a document management system, to his utter horror and refusal (he was the hard copy type, as were most officers in the ship). I gave up on almost all besides the assistant thing, because I knew that once I left, everything would go to the high-entropy status of carrying papers around, but the CO kept telling me that would be unnecessary.
"You'll always be our man, you'll fix it (sic)".
What could go wrong?
I got my transfer with 1 week's notice. Panic struck. The CO was... well, he was less shocked than I expected, but still shocked (I learned later that he knew beforehand, but decided not to tell anybody anything). So came the most rediculous request of all:
To put down, within 1 A4 sheet, and in simple instructions, the things one had to do in order to fulfil the duties of the computer guy.
I. SHIT. YOU. NOT.
My answer:
"What I can do is write: 'Please read the following:', followed by the list of books one must read in order to get some introductory understanding of network and server management, with most accompanying skills."
I was so glad I got out of that hellhole.

I actually just wanted to say - what a great time it is to be a developer.

C# has stolen so many good features now that it's pretty awesome.
JavaScript and typescript are really fun to work with.
I really love angular.
Docker is great!

I can setup pipelines and deploy an angular app for free and really easily with github-pages.

I can use linux inside windows.

I can use cloud providers to do all sorts for really cheap.

I can plug my cable-free oculus quest VR headset into my laptop and build a game pretty easily with unity (thanks to all the great oculus helper prefabs).

I can use tesseract and data science technology inside my browser!!

And I can go to medium and udemy and learn all sorts of things.

Honestly...

Just saying.
I'm actually really loving being a developer right now.

And if I do have off day, I can rant on here!

$sis: hey $me, can you help me?
$me: Uhm, sure, what's wrong?
$sis. The printer doesn't work..
$me: what does it say?
$sis: what do you mean?
$me: like, when you try to print something, what does it say?
$sis: uhm... idk...where should it say something
$me: On your screen you should be getting an error message right?
$sis (now getting irritated for some reason): no it doesn't..
$me: okay, let me check it out
*I walk to the printer with my sister's laptop and plug in the usb*
*Select printer > click print*
"Printer offline"
$me: was it also saying this before
$sis: uhm...yes
$me: ok
At this point im already getting a bit fed up
$me: are you sure this port is working
$sis: yes, I am sure
Okay, check other ports just to be sure, also don't work.
After about 15 minutes of debugging, turns out she managed to unplug the cable on the printer...
And all I got was a "o thanks"
Fml

I have this little hobby project going on for a while now, and I thought it's worth sharing. Now at first blush this might seem like just another screenshot with neofetch.. but this thing has quite the story to tell. This laptop is no less than 17 years old.

So, a Compaq nx7010, a business laptop from 2004. It has had plenty of software and hardware mods alike. Let's start with the software.

It's running run-off-the-mill Debian 9, with a custom kernel. The reason why it's running that version of Debian is because of bugs in the network driver (ipw2200) in Debian 10, causing it to disconnect after a day or so. Less of an issue in Debian 9, and seemingly fixed by upgrading the kernel to a custom one. And the kernel is actually one of the things where you can save heaps of space when you do it yourself. The kernel package itself is 8.4MB for this one. The headers are 7.4MB. The stock kernels on the other hand (4.19 at downstream revisions 9, 10 and 13) took up a whole GB of space combined. That is how much I've been able to remove, even from headless systems. The stock kernels are incredibly bloated for what they are.

Other than that, most of the data storage is done through NFS over WiFi, which is actually faster than what is inside this laptop (a CF card which I will get to later).

Now let's talk hardware. And at age 17, you can imagine that it has seen quite a bit of maintenance there. The easiest mod is probably the flash mod. These old laptops use IDE for storage rather than SATA. Now the nice thing about IDE is that it actually lives on to this very day, in CF cards. The pinout is exactly the same. So you can use passive IDE-CF adapters and plug in a CF card. Easy!

The next thing I want to talk about is the battery. And um.. why that one is a bad idea to mod. Finding replacements for such old hardware.. good luck with that. So your other option is something called recelling, where you disassemble the battery and, well, replace the cells. The problem is that those battery packs are built like tanks and the disassembly will likely result in a broken battery housing (which you'll still need). Also the controllers inside those battery packs are either too smart or too stupid to play nicely with new cells. On that laptop at least, the new cells still had a perceived capacity of the old ones, while obviously the voltage on the cells themselves didn't change at all. The laptop thought the batteries were done for, despite still being chock full of juice. Then I tried to recalibrate them in the BIOS and fried the battery controller. Do not try to recell the battery, unless you have a spare already. The controllers and battery housings are complete and utter dogshit.

Next up is the display backlight. Originally this laptop used to use a CCFL backlight, which is a tiny tube that is driven at around 2000 volts. To its controller go either 7, 6, 4 or 3 wires, which are all related and I will get to. Signs of it dying are redshift, and eventually it going out until you close the lid and open it up again. The reason for it is that the voltage required to keep that CCFL "excited" rises over time, beyond what the controller can do.

So, 7-pin configuration is 2x VCC (12V), 2x enable (on or off), 1x adjust (analog brightness), and 2x ground. 6-pin gets rid of 1 enable line. Those are the configurations you'll find in CCFL. Then came LED lighting which required much less power to run. So the 4-pin configuration gets rid of a VCC and a ground line. And finally you have the 3-pin configuration which gets rid of the adjust line, and you can just short it to the enable line.

There are some other mods but I'm running out of characters. Why am I telling you all this? The reason is that this laptop doesn't feel any different to use than the ThinkPad x220 and IdeaPad Y700 I have on my desk (with 6c12t, 32G of RAM, ~1TB of SSDs and 2TB HDDs). A hefty setup compared to a very dated one, yet they feel the same. It can do web browsing, I can chat on Telegram with it, and I can do programming on it. So, if you're looking for a hobby project, maybe some kind of restrictions on your hardware to spark that creativity that makes code better, I can highly recommend it. I think I'm almost done with this project, and it was heaps of fun :D

So 10 months ago i moved from Cambridge (UK) to Guildford (UK), due to moving this distance i started working from home and going into the office once a week.

Now after 10 months i have finally got my home office how i first imagined it. Everything runs from my laptop which is located on the shelving unit away from my desk. Everything plugs into it via 1 USB lead.

Setup:
27" 2560 x 1440 monitor flanked by two 1280 x 1024 monitors.
Asus Laptop (i5-6300HQ, 12GB ram, 512GB SSD + 1TB HDD)
Home PC (i5-7600, 8GB ram, GTX 770)

Accessories:
StarTech USB hub - This allows me to plug my three monitors, keyboards, mouse and everything else into my laptop.
KVM switch - Allows me to swap between my Work PC and Home PC with a click of a button

On a tiny vacation in another country. Don't have a converter plug (for the power sockets) so borrowed one.

*connects laptop to charger* (old charger which might die soon)
*nothing happens*
*slight panic*
*tries different sockets*
*nothing*
😨😲😭
"you might want to check your phone with that thing as the socket seems loose as hell"
*tries phone with charger that definitely works*
*nothing*

😰🙌

That was a fucking panic attack right there 😅

New dev couldn't get his laptop set up and screens working. After a day struggling I walked over and recommend he plug in the power cord......

TLDR; My 2TB HDD got wiped in one fell swoop by a 9-year old child.

You know... I've never been too great about keeping backups. Even to this day, I only keep one or two local backups and nothing on the "cloud".

So this was about 5 years ago. At the time, I was living together with my girlfriend - who would later become my wife. She had a son from a previous relationship, who at the time was 9 years old.

I had a small desk in the living room of our one-bedroom apartment, that I used for my computer, which has been a laptop for a long time now. One unfortunate thing about the layout of the apartment was that the wall plug near my desk was attached to a light switch.

I had a 2TB external hard drive - with its own power cable - plugged into my laptop. Then, things started to move in slow motion... The GF's son comes inside from playing, my GF asks him to turn off the light. He reaches over, and shuts off power to my laptop - and the external hard drive.

He must have hit that switch at JUST the right fucking time. The laptop ran on battery, no big deal. The hard drive, when I powered it back up - was wiped clean. I tried data recovery on it, but the HDD was encrypted, which makes things more complicated.

Needless to say, I was not happy. I never got that data back, but I did learn not to expose my hard drives to 9 year olds. Very dangerous little creatures.

You want to know the best part? He destroyed another hard drive of mine, a few years later. Should I tell that story?

Fuck you Apple. I forgot the headphone dongle for my iPhone at home, so now I can't (1) plug my apple headphones into anything (i.e. my laptop, which is made by the same fucking company) and (2) use any other headphones with my phone. Buying an iPhone was a mistake. Apple has been implementing the shittiest UX recently. Don't even bring up the fucking bezel on the iPhone X or the marketing bullshit that is "retina display". The worst part is the Apple fanboys that act like everything Apple pumps out has been touched by the hand of God—Tim Cook could show up at their house and kill their fucking dog right in front of their eyes and they'd worship Apple for doing it.

In a new country and in isolation.
Laptop out of charge. Plug converter broke so cannot connect my laptop to power.
Ordered one. Need to wait one whole day for it to arrive.
Perfect gloomy weather to just reflect my mood.
Not even allowed to go out for a walk.
Wrote down some pseudo on paper so I don’t forget.
Only to realise there was a problem with it.
So I rewrote it correctly.
Now just waiting.

So my HP laptop got a weird problem lately.

It doesn't charge when I plug in the charger(yes, i turned on the switch). So I began searching forums for a solution and then found out that there are so many people like me out there.
Then I was like ok, chill. There are many people like me, there must be a solution somewhere.

And after doing lots of research and trying all the solutions in the internet, the only thing that worked out is this ....

Step1 : turn on and the laptop and plug in the charger.
Step 2: Turn off the laptop.
Step 3: Now turn it back on and poof there you go, the laptop's charging.

And then I improvised the solution myself, which is u can replace the switch off part with Sleep which saved me some time.

And then whenever I try to show something my friends somethjng on my lap and the battery gets low, I do the ritual. For a brief moment their face becomes like dude I'm gonna kill you off, why the hell did u bring me here and now u r turning that off. And then I explain the history of my laptop.

Why HP whyyy ?

God, I don't know whether I believe in you or not, but please kill all those people who play loud music in public.

So, I was travelling by a train two days ago. Halfway down the 15 hr journey, the guy next to me took out his laptop and started watching a movie, on speakers, in full volume. It naturally irritated me a lot, and I requested him to use head/earphones, to which he replied that he forgot his one back home. I told him to keep the volume down to which he got personal and put the volume down (maybe to 95%). Since I hate human interaction, I had to plug in my own earphones to keep his bitchy noise away.

The same thing happened today on the bus, the only two differences being:
• mobile phone instead of laptop
• said he doesn't own headphones
• claimed he could do whatever he wanted as it was not illegal

Now, I wished he fell of the bus and died, but the world ain't fair, so he still lives.

So this was going to be a comment but damn!!!!

Windows is seriously about making life harder for power users now, every fucking update lately is moving more easy to change things and fucking hiding them inside hidden menus or stupid links that don’t make sense. I mean fuck I just want to turn on dual screen with my laptop (because for some bizarre reason, just showing the desktop on the plugged in monitor is so hard to do automatically, especially since I just plugged a hdmi cable in) and the fucker was gone with nothing but a “detect screens” button before it would use an external screen.

Fuck I’m so close to pulling the plug on windows, but Linux just doesn’t sell me for daily use (yet... it’s getting there though)

The fucking forced updates (yes I consider a random bsod due to a system interrupt, then as it reboots magically has updates awaiting... a forced update) are starting to get to me, the fucking thing half crashing and not responding due to a network transfer of files (the fucker was 5GB)

If it wasn’t for my gaming needs and someone can show me a very good alternative to MS Visio (I haven’t really found one yet) then I would swap over and just adjust to the not so great (imo) desktop environments.

In the before time (late 90s) I worked for a company that worked for a company that worked for a company that provided software engineering services for NRC regulatory compliance. Fallout radius simulation, security access and checks, operational reporting, that sort of thing. Given that, I spent a lot of time around/at/in nuclear reactors.

One day, we're working on this system that uses RFID (before it was cool) and various physical sensors to do a few things, one of which is to determine if people exist at the intersection of hazardous particles, gasses, etc.

This also happens to be a system which, at that moment, is reporting hazardous conditions and people at the top of the outer containment shell. We know this is probably a red herring or faulty sensor because no one is present in the system vs the access logs and cameras, but we have to check anyways. A few building engineers climb the ladders up there and find that nothing is really visibly wrong and we have an all clear. They did not however know how to check the sensor.

Enter me, the only person from our firm on site that day. So in the next few minutes I am also in a monkey suit (bc protocol), climbing a 150 foot ladder that leads to another 150 foot ladder, all 110lbs of me + a 30lb diag "laptop" slung over my shoulder by a strap. At the top, I walk about a quarter of the way out, open the casing on the sensor module and find that someone had hooked up the line feed, but not the activity connection wire so it was sending a false signal. I open the diag laptop, plug it into the unit, write a simple firmware extension to intermediate the condition, flash, reload. I verify the error has cleared and an appropriate message was sent to the diagnostic system over the radio, run through an error test cycle, radio again, close it up. Once I returned to the ground, sweating my ass off, I also send a not at all passive aggressive email letting the boss know that the next shift will need to push the update to the other 600 air-gapped, unidirectional sensors around the facility.

I haven't ranted for today, but I figured that I'd post a summary.
A public diary of sorts.. devRant is amazing, it even allows me to post the stuff that I'd otherwise put on a piece of paper and probably discard over time. And with keyboard support at that <3

Today has been a productive day for me. Laptop got restored with a "pacman -Syu" over a Bluetooth mobile data tethering from my phone, said phone got upgraded to an unofficial Android 9 (Pie) thanks to a comment from @undef, etc.

I've also made myself a reliable USB extension cord to be able to extend the 20-30cm USB-A male to USB-C male cord that Huawei delivered with my Nexus 6P. The USB-C to USB-C cord that allows for fast charging is unreliable.. ordered some USB-C plugs for that, in order to make some high power wire with that when they arrive.

So that plug I've made.. USB-A male to USB-A female, in which my short USB-C to USB-A wire can plug in. It's a 1M wire, with 18AWG wire for its power lines and 28AWG wires for its data lines. The 18AWG power lines can carry up to 10A of current, while the 28AWG lines can carry up to 1A. All wires were made into 1M pieces. These resulted in a very low impedance path for all of them, my multimeter measured no more than 200 milliohms across them, though I'll have to verify and finetune that on my oscilloscope with 4-wire measurement.

So the wire was good. Easy too, I just had to look up the pinout and replicate that on the male part.

That's where the rant part comes in.. in fact I've got quite uncomfortable with sentences that don't include at least one swear word at this point. All hail to devRant for allowing me to put them out there without guilt.. it changed my very mind <3

Microshaft WanBLowS.

I've tried to plug my DIY extension cord into it, and plugged my phone and some USB stick into it of which I've completely forgot the filesystem. Windows certainly doesn't support it.. turns out that it was LUKS. More about that later.

Windows returned that it didn't support either of them, due to "malfunctioning at the USB device". So I went ahead and plugged in my phone directly.. works without a problem. Then I went ahead and troubleshooted the wire I've just made with a multimeter, to check for shorts.. none at all.

At that point I suspected that WanBLowS was the issue, so I booted up my (at the time) problematic Arch laptop and did the exact same thing there, testing that USB stick and my phone there by plugging it through the extension wire. Shit just worked like that. The USB stick was a LUKS medium and apparently a clone of my SanDisk rootfs that I'm storing my Arch Linux on my laptop at at the time.. an unfinished migration project (SanDisk is unstable, my other DM sticks are quite stable). The USB stick consumed about 20mA so no big deal for any USB controller. The phone consumed about 500mA (which is standard USB 2.0 so no surprise) and worked fine as well.. although the HP laptop dropped the voltage to ~4.8V like that, unlike 5.1V which is nominal for USB. Still worked without a problem.

So clearly Windows is the problem here, and this provides me one more reason to hate that piece of shit OS. Windows lovers may say that it's an issue with my particular hardware, which maybe it is. I've done the Windows plugging solely through a USB 3.0 hub, which was plugged into a USB 3.0 port on the host. Now USB 3.0 is supposed to be able to carry up to 1A rather than 500mA, so I expect all the components in there to be beefier. I've also tested the hub as part of a review, and it can carry about 1A no problem, although it seems like its supply lines aren't shorted to VCC on the host, like a sensible hub would. Instead I suspect that it's going through the hub's controller.

Regardless, this is clearly a bad design. One of the USB data lines is biased to ~3.3V if memory serves me right, while the other is biased to 300mV. The latter could impose a problem.. but again, the current path was of a very low impedance of 200milliohms at most. Meanwhile the direct connection that omits the ~200ohm extension wire worked just fine. Even 300mV wouldn't degrade significantly over such a resistance. So this is most likely a Windows problem.

That aside, the extension cord works fine in Linux. So I've used that as a charging connection while upgrading my Arch laptop (which as you may know has internet issues at the time) over Bluetooth, through a shared BNEP connection (Bluetooth tethering) from my phone. Mobile data since I didn't set up my WiFi in this new Pie ROM yet. Worked fine, fixed my WiFi. Currently it's back in my network as my fully-fledged development host. So that way I'll be able to work again on @Floydian's LinkHub repository. My laptop's the only one who currently holds the private key for signing commits for git$(rm -rf ~/*)@nixmagic.com, hence why my development has been impeded. My tablet doesn't have them. Guess I'll commit somewhere tomorrow.

(looks like my rant is too long, continue in comments)

5 stages of failing WIFI connectivity on Linux

This morning I woke up my laptop to start my work day. I have 2 very important meetings today, so I better get all prepared.

"Wifi connection failed"
Syslog says:
- wpa_supplicant: wlp9s0: SME: Trying to authenticate with <MAC>
- kernel: wlp9s0: authenticate with <MAC>
- kernel: wl9s0: send auth to <MAC> (try 1/3)
- kernel: wl9s0: send auth to <MAC> (try 2/3)
- kernel: iwlwifi: Not associated and the session protection is over already...
- kernel: wl9s0: send auth to <MAC> (try 3/3)
- kernel: wl9s0: authentication with <MAC> timed out

#### DENIAL #####

No biggie, let's try another AP (I have 3). All 3 failed to connect. Fine, let's try my phone's hotspot! FAILED!!!!!

w00t.... okay, let's restart the router... but failing to connect to a phone hotspot is already a worrying sign.

Wifi connection failed

wtf.. disable and re-enable wifi

Wifi connection failed

#### ANGER #####

the fuuuuuuck. Maybe my router is dead. But my phone connects to it, no fuss. My personal lappy also connects there easily.

wtf... Does that mean I'm about to lose my uptime?? Come one!! It's Linux - there MUST be something I could do! I don't see processes hanging in D state so the radio must be fine - it's gotta be a software issue!

ChatGPT – type all the log entries manually, via phone (that took a while...). Nothing useful there: update firmware, restart NetworkManager, etc.

#### BARGAINING #####

Alright... How about a USB dongle? Plug it in and wifi connects immediately! Yayyy!!! But that's only b/g/n and I'd very much like to have ac. It works well as a limping backup, but not something I'd use for the meetings.

rfkill block/unblock all the radios. No change. USB dongle connects right away but the PCIe adapter keeps throwing notifications at me with failure messages. It's annoying, to say the least.

So I've already tried
- restarting the router(s)
- disabling/reenabling the radios
- multiple APs
- suspending/waking again several times
- praying

#### DEPRESSION #####

The only thing I haven't tried yet is the most cruel one - restarting the laptop. But that's unfair... It's LINUX! How could it disappoint me. I have so many tmux sessions open, so many unsaved leafpad notes, terminal histories with oh so comfy ^r and ! retriggers all ready and waiting to be executed...

#### ACCEPTANCE #####

But I can't miss the meeting. So I slowly start closing off apps, starting with the least important ones, trying to preserve as much history and recent commands as I can. I'm gonna lose my uptime, that's the inevitable obvious truth... Linux has failed me. Or maybe it's a hardware issue... I can't be sure until I restart.

I must reboot.

#### A NEW HOPE #####
Hold on.. What if... What if before restarting I try to reload the Intel wifi kernel module? Just for the giggles. I've got nothing to lose anyway...

rmmod iwlmvm
rmmod iwlwifi
modprobe iwlwifi
modprobe iwlmvm

*WiFi Connected*

YESSSS!!!!!!!!! My uptime is saved!
403 days and counting! YEAH BABY!!!

Linux is the best!

I do not like the direction laptop vendors are taking.

New laptops tend to feature fewer ports, making the user more dependent on adapters. Similarly to smartphones, this is a detrimental trend initiated by Apple and replicated by the rest of the pack.

As of 2022, many mid-range laptops feature just one USB-A port and one USB-C port, resembling Apple's toxic minimalism. In 2010, mid-class laptops commonly had three or four USB ports. I have even seen an MSi gaming laptop with six USB ports. Now, much of the edges is wasted "clean" space.

Sure, there are USB hubs, but those only work well with low-power devices. When attaching two external hard drives to transfer data between them, they might not be able to spin up due to insufficient power from the USB port or undervoltage caused by the impedance (resistance) of the USB cable between the laptop's USB port and hub. There are USB hubs which can be externally powered, but that means yet another wall adapter one has to carry.

Non-replaceable [shortest-lived component] mean difficult repairs and no more reserve batteries, as well as no extra-sized battery packs. When the battery expires, one might have to waste four hours on a repair shop for a replacement that would have taken a minute on a 2010 laptop.

The SD card slot is being replaced with inferior MicroSD or removed entirely. This is especially bad for photographers and videographers who would frequently plug memory cards into their laptop. SD cards are far more comfortable than MicroSD cards, and no, bulky external adapters that reserve the device's only USB port and protrude can not replace an integrated SD card slot.

Most mid-range laptops in the early 2010s also had a LAN port for immediate interference-free connection. That is now reserved for gaming-class / desknote laptops.

Obviously, components like RAM and storage are far more difficult to upgrade in more modern laptops, or not possible at all if soldered in.

Touch pads increasingly have the buttons underneath the touch surface rather than separate, meaning one has to be careful not to move the mouse while clicking. Otherwise, it could cause an unwanted drag-and-drop gesture. Some touch pads are smart enough to detect when a user intends to click, and lock the movement, but not all. A right-click drag-and-drop gesture might not be possible due to the finger on the button being registered as touch. Clicking with short tapping could be unreliable and sluggish. While one should have external peripherals anyway, one might not always have brought them with. The fallback input device is now even less comfortable.

Some laptop vendors include a sponge sheet that they want users to put between the keyboard and the screen before folding it, "to avoid damaging the screen", even though making it two millimetres thicker could do the same without relying on a sponge sheet. So they want me to carry that bulky thing everywhere around? How about no?

That's the irony. They wanted to make laptops lighter and slimmer, but that made them adapter- and sponge sheet-dependent, defeating the portability purpose.

Sure, the CPU performance has improved. Vendors proudly show off in their advertisements which generation of Intel Core they have this time. As if that is something users especially care about. Hoo-ray, generation 14 is now yet another 5% faster than the previous generation! But what is the benefit of that if I have to rely on annoying adapters to get the same work done that I could formerly do without those adapters?

Microsoft has also copied Apple in demanding internet connection before Windows 11 will set up. The setup screen says "You will need an Internet connection…" - no, technically I would not. What does technically stand in the way of Windows 11 setting up offline? After all, previous Windows versions like Windows 95 could do so 25 years earlier. But also far more recent versions. Thankfully, Linux distributions do not do that.

If "new" and "modern" mean more locked-in and less practical and difficult to repair, I would rather have "old" than "new".

So my teacher wanted to play a movie cos the class got good test results, and so she asked me how to play a movie on her laptop and get it on the TV and this is how it went down...

Teacher: Sukhi, do you think you could help me.

Me: Yea sure, what do you need help with

Teacher: So I want to play a movie tomorrow but I don't know how to get it up on the TV

Me: Oh its easy just get a HDMI cable and plug your laptop into it.

Teacher: Oh yea I have like 6 of those. Ok then see ya tomorrow.

*The next day*

Teacher: Hey Sukhi, heres the HDMI cable. *Pulls out a AUX cord*

Me: *laughing and crying at the same time*

So my school's wifi doesn't support my TV or something, all I know is the wifi doesn't appear as a potential connection for the TV. (Even then, when I plugged the TV into the Ethernet cable, it still gave me an error message.) Well I figured out a loophole Saturday night.

I plug the Ethernet cable into my laptop. Then activate the hotspot on my laptop. Connect to the TV through the laptop's connection. Problem solved.

Loopholes are one of the best parts of life.

A friend of my mom asks me transfer some files from her hard disk to her pendrive because I am supposedly *good with computers*.

As an obedient son, I go to her house to do the needful.

I switch on the laptop and plug both right in. At this point, I am wondering if this really my life is for.

Lost in my thoughts, I accidentally format her hard disk. Now I freak out. Seeing no possible way out, I remove both and say her work is done.

I quickly leave the house and never look back. To this day, I have never gone back to her house.

Well what an adventure with this SSD...😑
my sis' laptop is from 2013-ish(?) and has/had a slow HDD in it. I wanted to speed it up, before her study, so I bought a new internal SSD (no new laptop wanted).
Created a bootable USB, exchanged the hard drives and install the OS on it. Seems easy enough...
The laptop restarts to finish its process ... laptop shuts down immediately, no warning whatsoever. 😳🤨
Start it up, loading screen, fan gets louder and louder ... instant shut down.😳🤨🤨.
Redo process, this time landing on blue-screen, error code critical process died? ... instant shut down again.🤔
Restart from old HDD, normal.😐
Retry with boot USB and reinstall SSD. Setup process copying files, meanwhile instant shut down.😳 Please don't tell me!😩 Since every part of the laptop was working, except the new inserted SSD, I thought "FUCK not a broken SSD!😣"
I had my own PC with internal SSD slot, so tried to find out, whether it would be broken...
All starting up fine??🤨🤨
Ok then? Finish the setup for the third time now ... everything up and running.😐🤷
Normal shut down, unplug, plug back onto laptop, it works. HOW?? WHY?? 😕
Why the fuck are you suddenly working? 😐🤷🤷🤷
That's some magic...

I have a little big question

I don't have electricity most of the time but the ethernet cable from my internet provider is still working if i plug it in my laptop.
Except that i have to setup the credential from the provider, user and password.
Now!
I want to plug the ethernet into the raspberry pi (3B+) make it work , because idk where should i enter the credentials and then make hotspot so i can have a router powered up from the power bank.
A pi as router

Is it possible?

Because so far i have seen people who connect the pi to the router but mine requires electricity as any other else.

?? Welp

I HATE SURFACES SO FRICKING MUCH. OK, sure they're decent when they work. But the problem is that half the time our Surfaces here DON'T work. From not connecting to the network, to only one external screen working when docked, to shutting down due to overheating because Microsoft didn't put fans in them, to the battery getting too hot and bulging.... So. Many. Problems. It finally culminated this past weekend when I had to set up a Laptop 3. It already had a local AD profile set up, so I needed to reset it and let it autoprovision. Should be easy. Generally a half-hour or so job. I perform the reset, and it begins reinstalling Windows. Halfway through, it BSOD's with a NO_BOOT_MEDIA error. Great, now it's stuck in a boot loop. Tried several things to fix it. Nothing worked. Oh well, I may as well just do a clean install of Windows. I plug a flash drive into my PC, download the Media Creation Tool, and try to create an image. It goes through the lengthy process of downloading Windows, then begins creating the media. At 68% it just errors out with no explanation. Hmm. Strange. I try again. Same issue. Well, it's 5:15 on a Friday evening. I'm not staying at work. But the user needs this laptop Monday morning. Fine, I'll take it home and work on it over the weekend. At home, I use my personal PC to create a bootable USB drive. No hitches this time. I plug it into the laptop and boot from it. However, once I hit the Windows installation screen the keyboard stops working. The trackpad doesn't work. The touchscreen doesn't work. Weird, none of the other Surfaces had this issue. Fine, I'll use an external keyboard. Except Microsoft is brilliant and only put one USB-A port on the machine. BRILLIANT. Fortunately I have a USB hub so I plug that in. Now I can use a USB keyboard to proceed through Windows installation. However, when I get to the network connection stage no wireless networks come up. At this point I'm beginning to realize that the drivers which work fine when navigating the UEFI somehow don't work during Windows installation. Oh well. I proceed through setup and then install the drivers. But of course the machine hasn't autoprovisioned because it had no internet connection during setup. OK fine, I decide to reset it again. Surely that BSOD was just a fluke. Nope. Happens again. I again proceed through Windows installation and install the drivers. I decide to try a fresh installation *without* resetting first, thinking maybe whatever bug is causing the BSOD is also deleting the drivers. No dice. OK, I go Googling. Turns out this is a common issue. The Laptop 3 uses wonky drivers and the generic Windows installation drivers won't work right. This is ridiculous. Windows is made by Microsoft. Surface is made by Microsoft. And I'm supposed to believe that I can't even install Windows on the machine properly? Oh well, I'll try it. Apparently I need to extract the Laptop 3 drivers, convert the ESD install file to a WIM file, inject the drivers, then split the WIM file since it's now too big to fit on a FAT32 drive. I honestly didn't even expect this to work, but it did. I ran into quite a few more problems with autoprovisioning which required two more reinstallations, but I won't go into detail on that. All in all, I totaled up 9 hours on that laptop over the weekend. Suffice to say our organization is now looking very hard at DELL for our next machines.

I hate waiting for updates.

Like the time from when it goes public (whether press release or the update itself) to the time I get it? Yeah I hate that.

Roku released the new update, which includes support for Spotify. As a heavy Spotify user, this made me so happy. I got tired of having to plug my laptop into the HDMI port and controlling it with my phone.

But it's coming up on close to a month since it was released that the update would support Spotify and I've got nothing.

I'm too impatient sometimes.

Not my week for tech.

5 year old 21" desktop monitor burns out. 2nd monitor, so at least not completely down.

Then my toddler reached for my root beer and spills it on my 1 month old laptop. I quickly pull the plug and turn upside down, get it wiped off and pray. Next day, arrow and enter keys a little sticky and battery is blown. The 2 exact fucking reasons I bought the new laptop. (keyboard issues and battery)

Keep em coming tech gods.

I actually found a use for Outlook's scummy default behaviour to open links in Edge and not the default browser.

On my company laptop I mainly use Librewolf because it allows installing plug-ins despite group policy. I only use Edge for Azure DevOps and company portals because MS SSO doesn't work with Librewolf for some reason.

Because Outlook disregards the OS settings and uses Edge by default, MS software forms a sort of bubble, and I can freely set Librewolf as my default browser.

Just got my laptop back from the store, after having sent it in over 6 weeks ago due to a faulty keyboard. I had made a system image of the hard drive before I sent it in, so I could just restore it and have it ready to go. So I get the backup restoring, and at around 75%, the laptop died. I forgot to plug it in.

I am now currently downloading windows. This is going to be a long night.

- Be me, developing mobile game
- Make the following goal, coz project is very important.
- plug phone to laptop for testing.
- phone gets charged
- phone doesn't die for 2 days, fuck you ain't getting any entertainment forever

I was returning something at MicroCenter the other day. The guy in front of me was picking up a laptop be brought in to have fixed. They had replaced the motherboard, and put all his old data on an external drive.

"So what's this?"

"This is an external hard drive. We copied all the data from your laptop onto it and put a fresh install on it."

"So .. how do I get to it?"

"You just plug it in, over USB."

"So how ... how does that work."

This goes on for a while. Shop owner has to start his computer. Plug in the drive. There was a lot of, "So everything that was on here, is now on here?"

The guy had no basic understanding of external hard drives, USB, copying files ... thankfully while the files were copying from the hard drive to his desktop, he said he needed a longer cable to the router so he could put it on the other side of the room. It took the guy behind the desk an unreasonable amount of time to direct him to the isle with the Ethernet cables, but once he did, I was finally able to return my item.

I'm glad I no longer work in desktop support.

TLDR; windows sucks donkey balls

Sometime ago I started to get battery issues on my laptop using windows. Even with 100% charge it would soon display 0% when unplugged.

A few months back I switched to linux on my laptop and on my desk station. And to my surprise, battery issues dissapeared while using linux (manjaro i3). Anybody had that same problem?

Anyway I dual boot win 10 and linux just in case I'd need windows, and this week I noticed my root parition didn't have any space left.

For the next few hours I'm in a car so I thought hey great time to reinstall linux with a bigger root partition. I already had reinstalled windows, and with all the bloat removed, I could shrink my windows partition to make more space for linux.

Now all I need to do is prepare a usb stick with the manjaro iso. I could do that in linux, but since reinstalling windows killed my grub bootloader I couldn't boot up manjaro.

Right, so in windows I go and want to create this bootable EFI usb stick from the manjaro iso. Now the battery issue kicks in again, stating 0%. But with luck, the usb creation finished without my machine dying. Now I just need to restart my laptop and boot from the usb and .... Crap. my Laptop doesn't boot up anymore
-_-

Now i need to wait for a plug to be able to power it up again. Once I boot from the usb I'm sure I could use the laptop some more hours until the battery is actually dead. Fuck windows

Father bought a computer for the family in 2011. A HCl Dual Core Pentium 4 machine with 21" TFT screen. I was allowed to use it only under someone's presence for at-most 20 minutes each day for the next 6-9 months.

After that we got a network card (plug-and-play internet dongle) for the internet services. That's when I entered the world of internet and made a Facebook account. I was 12 then ¯\_(ツ)_/¯.

After two years or so, we're playing games on it, watching movies and using MS Word for school related stuff. Then my brother entered college, and used it for stuff like coding and image processing on Matlab, while I watched him doing so and getting yelled at for doing what I liked to do, at the same time.

After 5 years or so, I got a personal laptop with decent configuration for college work. The old computer still worked like charm.

Now, the old monk is at rest with old memories, unknown files and lot of bollywood songs.

PC desktop at work is failing, so i had to take my personal laptop last week. Almost lost a working day because of that ..
Took the desktop home to try and repair it on the free day, but for now i can't even plug it on one of my different home monitors ..
Gonna be fun !

I really regret switching to manjaro. So many things keep breaking, like my laptop won't sleep anymore, it stays up, whenever I plug in another display I get an error thrown at me. Among other weird behaviors (all screen related) that I can't seem to fix and make the experience feel like I'm running a very clunky win-poop machine.

On the other hand, setting up a very custom sddm theme and installing certain software like hadoop, rust, gimp, xfce tweaks and other things was such a breeze D: just "yay hadoop" and 90% of the work was done.

Grhhh... Wondering if I should accept defeat, and maybe switch to Linux MX or spend hours fixing what probably is a display driver issue that's pissing me off 😠

Hey guys
I'm trying to do something different from the usual and need your help.
I want to install linuxCNC in a pen drive (as in a live CD, but with the file system in the PEN which is usable)
I want to plug it into my mother's laptop, use it with my machines, then just unplug and it will run the native windows for my father.

How can I do this'?
I only find Live CDs, and I'm afraid of ruining my OS when If I try to install (afraid of installing on the SSD instead of the PEN).

Poor friend on the verge of punching a hole in his laptop because shitbeans(netbeans) runs like ass on his Windows machine(and just about every other ide for that matter). I bust out the good ol USB stick with Ubuntu still burned in that has been buried in the recesses of my backpack for aeons and get him up and running in 5 mins. Shitbeans boots up in a quarter of the time, other friends take note and request my services. Now I am considered the “plug” and instead of leaving an 8 ball on your desk for an undisclosed amount of cash. I convert my friends from the path of wickedness.

Under pressure for a big feature that had to be merged into develop like one month ago. But I couldn't because of issues I discover every single fucking day.

Today's issue is that a Cucumber test fails. I try reproducing it on my machine, it fails with a different error. Apparently I need to download some 10GB database file from some company server.

Alright, let's download it. But it's damn too slow. Well, let's have lunch in the meantime.

I come back, the download timed out at basically the same point I left it at.

I don't wanna try again. Not without trying to improve things. Download speed is ridiculous. Switching from Wi-Fi to Ethernet definitely helps, I thought.

The cable doesn't work. The port LEDs are both off. Is that cable even connected to something? So I follow that damn cable throughout my colleagues' desks. I'm now doing things without even remembering why.

I finally find the other end. It is plugged to the wall. I try another plug, but that fucking LED is still off. A colleague tells me: not all the sockets are actually connected to the switch, you have to call IT to have yours patched. Stay calm, stay caaaaalm...

A small lamp turns on in my head. Maybe something in my laptop is broken. So I try with a colleague's ethernet. That fucking LED is still off. A-ha.

Turns out, the shitty macbook adapter has this Ethernet port that DOESN'T work out of the box. It needs a driver to even realize there's a port. I look for it, I find it. I finally have wired connection. It's like having drinking water again.

I turn off WiFi, I re-try downloading that fucking database.

Nope, it's still stupidly slow. The bottleneck was in the dumbfuck internal server.

FUCK.

At least I have Ethernet now.

finally got a Powerline set, so I can actually *use* my desktop upstairs.

...wait, my ethernet isn't working.

look for the chipset's proper driver package...?

"oh it installs the wrong driver by default, which doesn't work on kernel 5.x. Use <other driver, DKMS>"

"oh it won't see your device? downgrade to <version>"

DKMS error: "<snip>/linux-headers-5.10<whatever>/Documentation/Makefile" doesn't exist

fuck it, plug laptop into powerline adapter

less useful than current situation

i'm going to fucking cry

Hey fellas, I have a question about Windows and Linux.
I love Ubuntu on my Laptop and since gaming is no prio at this time I'd like to install Linux on my Rig.
I want to install Linux on a separate drive and unplug my Windows drive so Linux can boot alone without selection at Bootmanager.
However, I'd like the possibility that Bootmanager will let me choose if I plug the Windows drive back in (just in case I'm really in need of Windows).
Is it possible?

Oh, all sorts, but the one I always quote at her is the time she couldn't plug her laptop in because it had, I quote, "A funny plug on it that doesn't quite fit."

I took off the plastic socket protector... :-)

Higher refresh rates are an absolute garbage feature in warm countries.

My laptop switches to 300 Hz refresh rate, automatically, when I plug the charger in. And 2 mins later, my laptop is a literal oven and the fans sound like a fighter jet flying right above ur head.

My phone has a 144 and 120 Hz refresh rate feature but I never use it. I played a game of PUBG Mobile on 120 Hz and it made my phone so hot I couldn't hold it properly.

I have no specific story to tell (for now. Will post ke if i remember one) but i have had tons of CS teachers that are shit. From ones who don't know shit to ones who are so bad as a human being i am sure thrte are hundreds of people out there to kill them. I have had multiple teachers where all they did was read out a book and we'd have o site everything they read. Whole fucking semester. And not just one person or once. M-U-L-T-I-P-L-E TIMES AND TEACHERS. then I ve had ones who would rejection my code even if it's better, is right, can andle more edge cases, most likely magnitfrs of times faster and isn an eye sore with just effig if-else on op of if-else nested within if-else with many for loops. Then there are those who want you to do just what they want and expect you to not have a life of your own. Those who blatantly abuse their powers. Those who couldn't care less. Those who are not that bad a teacher but their attitude and style just makes you want to leave. There's one currently who wants a group of 4 people in second year to develop a full blown industry level application in mere 3 weeks. AND WE ARE HAVING OUR THEORY PAPRRS INBETWEEN FOR 2 EFFING WEEKS. So that's just like a month. Fortunately I have a group that's good enough that I can have them do the testing and filling up the documentation​ (did I mention that he needs full documentatiin for software plus a report on how our development process) and have them work on presentation (yup. We need to present this thing) all for just 50 marks. 1 uni credit. Our system still gives 80% weightage to pure theory. Plus the practical part is somewhat theory too.

Our HOD wants us *insists*forces** to stay back at college and work on projects (which is nice but what he ments is use the shitty outdated books from early 2000s to study something). Now I'd be happy to stay back if college provided decent internet (I am not asking for gigabit speeds. Even 1-2Mbps would work) and place to sit. But nope, our college non-teaching staff is eager to send us out of their department and by extention college building. There is literally nowhere you can sit. Plus yup, there is no internet and nowhere for you to plug your laptop in. That's a moot point anyway because they don't want you to use your laptop in college library or anywhere anyways. Plus you don't get much of mobile data too because of the building design. Those work only near windows. Why would I be at college if I can get a 50+Mbps down, area to sit, snacks, port to charge all at home. And you'd say we should talk with him about this – well it's not his issue is all he has to say.

Well, such is life in Indian colleges. And my college/uni is one of the better ones.

Imma guess the answer is no but has anyone ever heard of an external cuda enabled gpu you can plug into your laptop ? and maybe a seperate power jack lol

You have to give it to Crysis devs. A game from 2007 that I tried on my setup

32 GB GDDR5 RAM.
nVIDIA RTX 3080M
AMD 5900HX 8 Core
1TB NVME SSD

Ultra settings hit about 45-50 FPS and I have to plug earphones in to zone out the laptop fan sound.

Okay this is gonna sound weird just hear me out.

I feel a massive difference when programming on a desktop compared to my laptop.

I prefer using a desktop so much compared to my laptop. I usually have to plug my laptop into a monitor for the past year, and I can’t use my desktop because it’s currently, uh, let’s say inoperable.

The WiFi/Bluetooth chip in my SP3 died. Now I have to plug in this stupid adapter in my only USB port. So, that being said...

Ranters, best 2-in-1 convertible laptop, go!