So this was a couple years ago now. Aside from doing software development, I also do nearly all the other IT related stuff for the company, as well as specialize in the installation and implementation of electrical data acquisition systems - primarily amperage and voltage meters. I also wrote the software that communicates with this equipment and monitors the incoming and outgoing voltage and current and alerts various people if there's a problem.

Anyway, all of this equipment is installed into a trailer that goes onto a semi-truck as it's a portable power distribution system.

One time, the computer in one of these systems (we'll call it system 5) had gotten fried and needed replaced. It was a very busy week for me, so I had pulled the fried computer out without immediately replacing it with a working system. A few days later, system 5 leaves to go work on one of our biggest shows of the year - the Academy Awards. We make well over a million dollars from just this one show.

Come the morning of show day, the CEO of the company is in system 5 (it was on a Sunday, my day off) and went to set up the data acquisition software to get the system ready to go, and finds there is no computer. I promptly get a phone call with lots of swearing and threats to my job. Let me tell you, I was sweating bullets.

After the phone call, I decided I needed to try and save my job. The CEO hadn't told me to do anything, but I went to work, grabbed an old Windows XP laptop that was gathering dust and installed my software on it. I then had to build the configuration file that is specific to system 5 from memory. Each meter speaks the ModBus over TCP/IP protocol, and thus each meter as a different bus id. Fortunately, I'm pretty anal about this and tend to follow a specific method of id numbering.

Once I got the configuration file done and tested the software to see if it would even run properly on Windows XP (it did!), I called the CEO back and told him I had a laptop ready to go for system 5. I drove out to Hollywood and the CFO (who was there with the CEO) had to walk about a mile out of the security zone to meet me and pick up the laptop.

I told her I put a fresh install of the data acquisition software on the laptop and it's already configured for system 5 - it *should* just work once you plug it in.

I didn't get any phone calls after dropping off the laptop, so I called the CFO once I got home and asked her if everything was working okay. She told me it worked flawlessly - it was Plug 'n Play so to speak. She even said she was impressed, she thought she'd have to call me to iron out one or two configuration issues to get it talking to the meters.

All in all, crisis averted! At work on Monday, my supervisor told me that my name was Mud that day (by the CEO), but I still work here!

Here's a picture of the inside of system 8 (similar to system 5 - same hardware)

I'd love to finish a few projects I'm currently working on:

- An add-on which gives a middle finger to websites which use services/products ran by companies which are known to be integrated within the biggest mass surveillance system ever created (US powered). Not because just fuck those websites but because I think (@PonySlaystation came up with this idea) that its only fair that people get to know which websites 'sell them out'. Oh and "but not everyone cares about that" - you don't HAVE to install the addon.
(will be open sourced)

- Notes service with a fun thing.

- PHP based server/website/whateverthefuckyouwant monitoring system which is pretty much module based and works with json files as configuration. (kinda works but still loads of bugs to solve and gotta improve the module system a lot).
(will be open sourced)

- PHP based pihole alternative which suits my needs (will be open sourced)

- Forgot one 😅

Prologue
My dad has an acquaintance - let's call him Tom. Tom is an gynecologist, one of the best in Poznań, where I live. He's a great guy but absolutely can not into tech of any kind besides his iPhone and basic PC usage. For about a year now I've been doing small jobs for him - build a new PC for his office, fix printer, fix wifi, etc. He has made a big mistake few years ago by trusting a guy, let's call him Shitface, with crating him software for work. It's supposed to be pretty simple piece of code in which you can create and modify patient file, create prescription from drugs database and such things. This program is probably one of the worst pierces of code I've ever seen and Shitface should burn for that. Worse, this guy is pretentious asshole lacking even basic IT knowledge. His code is garbage and it's taking him few months to make small changes like text wrapping. But wait, there's more. Everything is hardcoded so every PC using this software must have installed user controls for which he doesn't have license and static IP address on network card.
Part 1
Tom asked me to build him a new PC that will be acting like a server for Shitface's program. He needs it in Kalisz (around 150 km from my place). I Agred (pun intended) and after Tom brought me his old computer I've bought parts and built a new one. I have also copied everything of value and everything took me around three hours.
Part 2
Everything was ready but Shitface's program. I didn't know much about it's configuration so when I've noticed that it's not working even on the old PC I got a bit worried. Nevertheless I started breaking everything I know about it and after next three hours I've got it somewhat working. Seeing that there's still some problems with database connection (from Windows' Event Viewer) I wrote quick SMS to Shitface asking what can be wrong. He replied that he won't be able to help me any way until Monday (day after deadline). I got pissed and very courteously asked him for source code because some of libraries used in this project has license that requires either purchase of commercial license or making code open source. He replied within few minutes that he'll be able to connect remotely within next 10 minutes. He was trying to make it work for the next hour but he succeeded. It was night before deadline so I wrapped everything up and went to bed thinking that it won't take me more than an hour to get this new PC up and running in the office. Boy was I wrong.
Also, curious about his code, I've checked source and he is using beautiful ponglish (mixed Polish and English) with mistakes he couldn't even bother to fix. For people from Poland, here's an example:
TerminarzeController.DeleteTerminarzShematyDlaLekarza
Part 3
So I drove to Kalisz and started working on making everything work. Almost everything was ready so after half an hour I was done. But I wanted to check twice if it's all good because driving so far second time would be a pain. So I started up Shitface's program, logged in, tried to open ANYTHING and... KABUM. UNHANDLED EXCEPTION. WTF. I checked trace and for fuck sake something was missing. Keep in mind that then I didn't know he's using some third party control for Windows Forms that needs to be installed on client PC. After next fifteen minutes of googling I've found a solution. I just had to install this third party software and everything will work. But... It had to be exactly this version and it was old. Very old. So old that producent already removed all traces of its existence from their web page and I couldn't find it anywhere. I tried installing never version and copying files from old PC but it didn't work. After few hours of searching for a solution I called Mr Shitface asking him for this control installation file. He told me that he has it but will be able to send it my way in the evening. Resigned I asked for this new PC to be left turned on and drove home. When he sent me necessary files I remotely installed them and everything started working correctly.
So, to sum it up. Searching for parts and building new PC, installing OS and all necessary software, updating everything and configuring it for Tom taste took me around what, 1/3 of time I spent on installing Mr Shitface's stupid program which Tom is not even happy with. Gotta say it was one of worst experiences I had in recent months. Hope I won't have to see this shit again.
Epilogue
Fortunately everything seems to work correctly. Tom hasn't called me yet with any problems. Mission accomplished. I wanna kill very specific someone. With. A. Spoon.

Me a while ago talking to a recruiter over the phone. This was for a C++ dev position.

(R)ecruiter : So except for the development things, we are looking for someone who has experience configuration linux. Do you have any experience with that?

(M)e : Sure, I use Linux all the time. What do you mean.

R : Well, Just using Linux isn't enough for this position, you need to have experience in configuration Linux.

M : Well. I can't answer your question if you don't specify what you mean. Do you mean that I need to be able to install my own packages? Set up my dev environment? Bash scripting? Being able to configure my bash profile to have good aliases? Use Linux to develop software? Because I can do all of these.

M : Or do you need someone who can write Kernel modules for the OS, because I don't have any experience in that but would like to learn.

R : Oh, I don't really know what it means. But the paper says that you need to have experience configuration Linux. So what would you say your experience with that is?

Me internally : JESUS CHRIST I JUST TOLD YOU WHAT I KNOW AND WHAT I DON'T KNOW HOW ARE YOU GOING TO ASSESS ME CORRECTLY.

Me 😎 : I use Arch and you have to set it up completely from the ground by your self so I know everything there is to know.

Basically every question was like this with the recruiter. I got further in the process but quit because the workplace looked like it would drain my soul when I got interviewed by the employees of the company.

Jesus Christ though, some recruiters could be replaced by an automated phone system.

Yesterday (or the day before that depending on your timezone and day-night schedule - this Friday) my OnePlus 6T arrived. After only 2 days of time between placing the order and actually getting the phone, quite impressive!

The DHL guy asked me upon receipt - is it the OnePlus 6T? - Yes it is!! - "An amazing device it is!", he said. And honestly.. he couldn't be more right.

I might be a bit biased on this because after all I did just spend €630 on this phone. But it feels so snappy, high quality, the 8GB of RAM is just.. it blows my mind. But I'm sure that the other reviews did this sort of jazz already.

The things that set this phone apart for me though were the following.

When I get a new phone or tablet, usually the first thing I do is rooting it. This one was no different, about an hour after receipt it was successfully rooted and loaded with Magisk. Currently I'm still in the phase of "getting to know the phone", wherein fuckups are usual. This time again being no different - I removed some apps and apparently did something to it that the search engines - both Google and DuckDuckGo - didn't quite like, as both of them would crash upon application launch. Me in full panic mode of course, desperately trying to find the stock ROM (which doesn't seem to be present in its usual form) or a new set of GApps (which didn't resolve the issue). OnePlus does seem to offer its OTA updates in zip archives though. So I downloaded its latest update (same as what was on the device) and applied it.

That's when the nerdgasm happened.

The "update" was simply a matter of going into the settings, tapping this and that and applying the update. No recovery, no unrooting, no nothing. The update just went like that despite the phone being rooted and just having had TWRP flashed to it. I always wanted this sort of thing, which even the Nexus couldn't offer - having the cake and eating it too. Being able to root the device and muck around with it while still being able to update the device timely without too many hurdles. This fucking thing does it!!!

That is to say, after my initial nerdgasm I did find that it bulldozed over my su binary (effectively unrooting the thing), custom emoji I've set (iOS 12 because fuck Google's most recent emoji set) and some other things. But those are easy to install back, much more so than it would've been to download a whole Android release and dirty flash it, as it was on the Nexus.

Other than that, battery life, dash charging (edit: on that topic, it does remain cool like a cucumber despite getting 15-20W of power jammed into it, quite impressive!), snappiness, the usual jazz.. eh, as I said earlier that's the usual reviewer stuff. But this feature of being able to upgrade the phone while it's modified, that's something which seems to be severely underrated by those.

Oh and during kernel builds, I couldn't quite get the source to work - probably due to my lack of experience with builds of Android kernels - but I did find that this phone actually exposes its kernel config through /proc/config.gz as it should. None of my MediaTek devices do this, so that's something that I found really appealing. Always nice to see when a manufacturer exposes this information to give you a stock sort of config that you can be rest assured will work configuration-wise. And it allows you to see what the stock kernel is actually built with, which again is really nice. I quite like this! It really encourages further development.

An important message:
PrOpErLy managing servers is HARD.

I get pissed off at customers with ZERO server knowledge who think they can manage their VPS. “Just get a control panel and a VPS” from some flashy provider that makes server management look way too easy.. Clicking around in their fancy control panel, until:

- they need help with their *self-managed* VPS;
- their email ends up in spam;
- they suffer from performance issues;
- they need to restore a backup;
- something breaks, because YES, things break

Way too little people are able to answer:

- when and how do you make backups?
- how do you monitor your servers and which services?
- how do you keep track of trend analysis?

Then I come by with necessary software. SNMP for trend analysis, Graphite for infrastructure health, Sensu for monitoring, Kibana, Ansible for configuration management..

Things that servers need but that customers have never even heard of.. because they can do everything in their control panel..

Until they come crying to me because it broke and they don’t even know how to get into SSH.

I think the ones to blame are VPS providers that tell the tale of how easy it is to install a control panel and never look at your server again.

Customers become responsible for something *business-critical*! Yet they don’t know how it works.

Let's install some Addons! Hmm where is that menu item... oh could it be called Extensions? No? Wait... maybe Plugins then?

Maybe it's inside of a Settings window. Oh there's nothing called settings in this endless menu I think. Or is it called Preferences? Options? Properties? Configuration? Ugh and should I look in the File or Edit or Extra menu in this App, Application and/or Program?

Maybe I can Search for it?

OH YOU FUCKING NAMED THAT FIND INSTEAD OF SEARCH, YOU PRESUMPTUOUS PRICK, I CAN'T FUCKING FIND ANYTHING IN YOUR BLOATED GOO OF A GUI.

*scrambles back into his bash-shell like a hermit crab, making soft defensive noises*

The newest addition to our lab - Pikachu!
We managed to overcome the weirdest pinout configuration ever on the MCU and power up the Nvidia Jetson.
Next week I'm going to make a clean install of the Jetson because there is some funky garbage there, and then I'll try to drive the little beast :)

So, I found this :

Dear Tech Support:
Last year I upgraded from Girlfriend 7.0 to Wife 1.0. I soon noticed that the new program began unexpected child processing that took up a lot of space and resources. In addition, Wife 1.0 installed itself into all other programs and now monitors all other system activity. Applications such as Poker Night 10.3, Football 5.0, HuntingAndFishing 7.5, and Racing 3.6. I can't seem to keep Wife 1.0 in the background while attempting to run my favorite applications. I'm thinking about going back to Girlfriend 7.0, but the uninstall doesn't work on Wife 1.0. Please help!

Thanks ...Troubled User
-------
REPLY:

Dear Troubled User:
This is a very common problem. Many people upgrade from Girlfriend 7.0 to Wife 1.0, thinking that it is just a Utilities and Entertainment program. Wife 1.0 is an OPERATING SYSTEM and is designed by its Creator to run EVERYTHING!!! It is also impossible to delete Wife 1.0 and to return to Girlfriend 7.0. It is impossible to uninstall, or purge the program files from the system once installed. You cannot go back to Girlfriend 7.0 because Wife 1.0 is designed not to allow this. Look in your Wife 1.0 manual under Warnings-Alimony-Child Support. I recommend that you keep Wife 1.0 installed and work on improving the configuration. I suggest installing the background application YesDear 99.0 to alleviate software augmentation.

The best course of action is to enter the command C:\APOLOGIZE because ultimately you will have to do this before the system will return to normal anyway.

Wife 1.0 is a great program, but it tends to be very high maintenance. Wife 1.0 comes with several support programs, such as CleanAndSweep 3.0, CookIt 1.5 and DoBills 4.2. However, be very careful how you use these programs. Improper use will cause the system to launch the program NagNag 9.5. Once this happens, the only way to improve the performance of Wife 1.0 is to purchase additional software. I recommend Flowers 2.1 and Diamonds 5.0, but beware because sometimes these applications can be expensive.

WARNING!!! DO NOT, under any circumstances, install SecretaryWithShortSkirt 3.3. This application is not supported by Wife 1.0 and will cause irreversible damage to the operating system. 

WARNING!!! Attempting to install NewGirlFriend 8.8 along with Wife 1.0 will crash the system.

(see Wife 1.0 manual, Apologize, High Maintenance & Secretary with Short Skirt)

I've accomplished something I thought I'd never do.
I convinced my boss to switch from SVN to Git. (before SVN we've even been using CVS if someone remembers)
Only requirement: it needs to stay in house and I'm the one setting up the server, writing documentation and teach everyone how to use it.

What? Why should I setup the server? Don't we have someone whose job it is to... OK ok... I'll do it.

So after some painstaking arguments with the guy whose job it should have been to do that, I've managed to install a virtual machine running Gitlab.

Long story short: I've just found out about the joys of mail configuration to send E-Mails to established mail providers. Every... single... one of them has a different problem with the way the mails are sent.
Fml

I think I'm going to ask that guy again to use our mail servers SMTP. There should be a possibility to use my gitlabs domain for that somehow.
Really looking forward to Monday. Ugh...

When my company moved to the big city we all got new equipment. I selected a ThinkPad and two 24" Dell monitors. Most got themselves a MacBook pro and a 27" Samsung monitor.

Once the new great arrived I started my journey to free the poor ThinkPad from the spy-software that is windows and install Arch.
Everything went smooth until I connected both monitors via MST to the single mini Displayport. Screens flickered, flashed or started dark. Even the display inside the ThinkPad. After half a day of trying to get MST to work with the Nvidia/Intel hybrid graphic inside my ThinkPad I installed Windows on the second ssd and got some actual work done.

The next day I finally managed a static xconf that had all three displays in just the right configuration and I started to work on Linux.

The story would end here if Arch wasn't Arch and I had not installed updates when I did.

After about 6 month of happy working on Linux Paradise I updated Arch since it was overdue (two weeks without). Shit hit the fan. Cinnamon's display manager didn't like my xconf and crashed during startup. Sadly from previous experience I knew that this was the only dm that would work somewhat stable with my hardware comp. I tried to debug, created multiple issues on the various GitHub repos and invested another week into it before dropping Linux again.

I never doubted my knowledge of Linux more than during the times I tried to get MST working with Nvidia/Intel graphics on my ThinkPad.

Recently I switched to a 27" one monitor setup and I'm back on Arch without any trouble because MST isn't in the mix this time.
I guess the story had a happy end after all

CMS: Library not detected
Me: Argh!
Check permissions

CMS: Library not detected
Me: Everytime, you F***er!
Download different version

CMS: Library not detect
Me: WTF!!!
20 minutes later....
...
wrong server😒

Was forced to do some work on Windows this week (CAD tools that runs only on Windows). I spent a few days just setting up the tools. There were quite a few things I realized I forgot about Windows (as compared to Linux).

1) Installation times are down right horrific. What exactly are the installer doing for 10 minutes?
2) .NET is a cluster fuck. Not even Microsofts repair tool can fix it, but rather just hangs. I ended up using another tool to nuke it and reinstall.
3) Windows binary installs are insanely huge, thus, takes forever to download.
4) The registry is a pointless database that must have been written in hell with the single intent of destroying users will to live. The sole existence of the registry is another proof that completely incompetent engineers designed Windows.
5) Rebooting is the only way to solve many problems. This is another sure sign of a fundamentally fucked up OS design.
6) What the heck is wrong with the GUIs designers? The control panel must be the worst design ever. There are so many levels to get to a particular setting I'm getting dizzy. Nothing gets better by the illogical organisation.
7) Windows networking. A perversion of the tcp/ip stack that makes it virtually impossible to understand a damn thing about the current network configuration. There are at least 3 different places that effects the settings.
8) Windows command prompt. Why did they even bother to leave it in? The interpreter is as intelligent as retarded donut. You can't do anything with it, except typing "exit" and Google for another solution.
8) Updates. Why does it takes hundreds of updates per month to keep that thing safe?
9) Despite all updates that is flying out of Redmond like confetti, it is still necessary to install antivirus to keep the damn thing safe. That cost extra money, and further cost you by degrading performance of your hardware.
10) Window performance. Software runs like it was swimming in molasses. The final stab in the back on your hardware investment, and pretty much sends performance on your hardware back a few hundred bucks more.
11) Closed source is evil. If something crash consistently, you might find a forum that address the issues you have. Otherwise you're out of luck. On the other hand, it might be for the better. I imagine reading the code for Windows can lead to severe depression.

I'm lucky to be a Linux dev, and should probably not complain too much... But really, Windows, go get yourself hit by a truck and die. I won't miss you.

Built a C#/.NET application with support for a serial device. Tested it on systems A, B, C initially, all Windows system, same .NET version, same targeting, same build tool version, same initial connection configuration etc, etc.

Testing - works on A and C, B nopes.
...
OK, let's check the source, is there something about B that makes it impossible to execute that bit? - No, there is not, you checked that already, stop poking around, it definitively should work on B.
...
OK, maybe admin privileges, there is I/O involved, didn't need that on A and C, but who knows - nope, doesn't work on B.
...
OK, maybe something wrong with the connection settings? First try at reinstalling driver - but no, it doesn't work on B.
...
OK let's try with another device - more/less devices on B. Other USB ports. No. Still does not work on B.
...
OK, this is stupid, but, is the cabling alright? It is, of course it is, stupid - but it still does not work on B.
...
OK, at that point I'm just gonna ask a colleague, GrumpySoftwareDev whether he has any clue why it doesn't work on B. GrumpySoftwareDev knows nothing, but discovers that one of his applications doesn't work on Windows 10. You know nothing, Jon Snow, but it doesn't work on B.
...
OK, now I'm just going to ask another colleague TheLastOfHisKind who handed B down to me somewhat bluntly if he ever experienced problems when working with B and its serial configuration. TheLastOfHisKind tells me he does not and kindly offers me some input on the situation. Still no progress to get it working on B but he hinted he might have fucked up B's driver. I already reinstalled the driver but didn't reboot, which comes after reinstall.
...
OK, I'm just gonna remove and re-install the driver, then restart. Hu! Now the UI is gone but another serial device reacted on a general call. Not fully working on B but we're getting there.
...
OK, I don't know, I'm getting frustrated, let's borrow another system D - which has roughly the same configuration as B - from my colleague StrongCurrentGuy. StrongCurrentGuy borrows me his system and cautions me not to break it. I install the driver, plug the device and copy the application from B. It just works on D. Not on B though.
...
OK, you know what. I'm done. For shits and giggles I'm gonna remove that driver again, reinstall it and restart, maybe it'll magically work afterwar- WHAT THE HELL, I JUST OPENED IT AFTER RESTARTING, IT JUST WORKS - ON B!

... seriously, what the fuck. But yeah, at least it works now.

The argument of "vim/zsh/whatever is not good because it requires configuration, and you don't usually have that on a new server" is a weak argument and it can suck my fucking nuts.

If some people are weak and lazy and forget how to use plain bash because they added a single alias, that's their problem.

That's like saying that getting used to a car is a bad thing because you can forget how to ride a bike.

Even if I did have the brain of a fish and forgot to use a bike because of using a car, I'll still be using a car 95% of the fucking time, so I'll take it.

If you do customize your setup, you can write an install script, dockerize, or just fucking something, it's 2019, you can do whatever the fuck you want.

Get a fucking couple of neurons.

Yesterday, i had to use neovim for a task on my friend's laptop. There was no WiFi and I couldn't install Emacs. This guy uses Vim a lot. He recently moved to neovim from vim. He had some Ruby codes going. I had to debug some codes(performance issues). I was reluctant to work on it but i had to. After looking at some keybindings and the plugins that guy had written, using vim was pleasure. It was fast. I could shoot up multiple terminals work on that and was instant. I wrote some plugins to indent my code which worked as it's supposed to. I used spacemacs(as it's configured properly) Emacs but there is some load time on spacemacs and there are some issues shooting up multiple spacemacs on terminals. I had just configured and started using prelude which is beautiful Emacs configuration and is fast.
After using neovim that day something hit me that i had blindly had faith in Emacs without using Vim and i use Emacs only for text editing task and terminal. I don't use it for listening music, browser and other task i can always use modern browsers and Spotify for that. Modern browsers and music players are amazing and using those in Emacs there is always a lack of functionality and UI.(modern people don't use those i think and some Emacs users i know use stripped down version of Emacs i.e. microemacs or XEmacs.

I know vi is present by default on every Linux distribution. That keybindings are same as vim and it can be configured so, it is useful for embedded devices and system architecture. I love terminals and love working on tty. That's why i guess i felt instantly tempted to keep on using vim and i loved it's performance. I checked on evil layer before but there are some issues with evil layer in Emacs like it isn't too efficient like vim. I love lisp though and clojure can be edited nicely in Vim.

Is this sin against the church of Emacs? Should i join vi vi vi? I have already dedicated my life on Emacs (check my bio). Am i tempted by the devil?

Fuck Unity.
Every single time I try to use Unity to develop my well-along-in-development video game, it finds some way of fucking itself up.
Be it from somehow failing to compile a DLL - which is something completely out of my control, the inspector failing to update itself when I select a new object every five minutes, to the engine managing to fail to load its UI layout because it somehow managed to lose a file responsible for containing the layout, the Inspector forgetting to include a scrollbar and as such trying to cram a bunch of components into one area, crashing in a certain area because I tried using reflections, crashing because I tried running the game in a place that always works, all the way to the whole thing closing instantaneously when I try selecting a new layout.
My experience with using this god-forsaken configuration of code and imagery has been one of endless torment; I've spent hours lamenting about the pain this piece of utter horseshit has caused me to those who'd listen.
I don't know what I did to this thing to deserve to be shown the absolute worst of this engine for the year I've been working on my game for. I can't even take a look at its source code to see if I can piece together things I'll pick up from alien code to fix obnoxious bugs myself because you cunts have it under lock-and-key for some dumbass reason.
Even updating my install of this engine is a gamble; I remember clear-as-day updating my project from 2019.3.14 to whichever one was most recent at the time, and everything breaking. This time, I got lucky and managed to update to 2020.1.4 with no issue on the surface, except I inadvertently let in a host of other issues that somehow made the editor worse than the older one.
There's little point in even bothering to report a bug because this shit happens so randomly that I could be just working on auto-pilot and the next thing I know Unity's stupid "crash handler" rears its ugly head yet again, or you people are probably too busy adding support for platforms no sane person uses like fucking Chromebooks.
There've been times where it's crashed upwards of three times in the span of 40 minutes of light use.
How is one expected to cough up hundreds of dollars a year to use a "pro" version of this horrid editor when every session of use yields a 50/50 chance that it'll either work like it's supposed to, or break in one way or another?
It's a miracle I even managed to type all of this out in one go, I expected the website to just stop responding entirely once I got past four lines.
Do what you will with my post, I don't care.

I invested in a brand new 27" curved monitor to work more efficiently with my laptop but now
HDMI isn't recognized by my linux distro on dual boot where it works perfectly with fucking windows and it used to work nice before the latest update
Tried to install official nvidia drivers to try to fix that
🙃 Guess who has a fucked up X configuration now 🙋🏾‍♂️

ZNC shenanigans yesterday...

So, yesterday in the midst a massive heat wave I went ahead, booze in hand, to install myself an IRC bouncer called ZNC. All goes well, it gets its own little container, VPN connection, own user, yada yada yada.. a nice configuration system-wise.

But then comes ZNC. Installed it a few times actually, and failed a fair few times too. Apparently Chrome and Firefox block port 6697 for ZNC's web interface outright. Firefox allows you to override it manually, Chrome flat out refuses to do anything with it. Thank you for this amazing level of protection Google. I didn't notice a thing. Thank you so much for treating me like a goddamn user. You know Google, it felt a lot like those plastic nightmares in electronics, ultrasonic welding, gluing shit in (oh that reminds me of the Nexus 6P, but let's not go there).. Google, you are amazing. Best billion dollar company I've ever seen. Anyway.

So I installed ZNC, moved the client to bouncer connection to port 8080 eventually, and it somewhat worked. Though apparently ZNC in its infinite wisdom does both web interface and IRC itself on the same port. How they do it, no idea. But somehow they do.

And now comes the good part.. configuration of this complete and utter piece of shit, ZNC. So I added my Freenode username, password, yada yada yada.. turns out that ZNC in its infinite wisdom puts the password on the stdout. Reminded me a lot about my ISP sending me my password via postal mail. You know, it's one thing that your application knows the plaintext password, but it's something else entirely to openly share that you do. If anything it tells them that something is seriously wrong but fuck! You don't put passwords on the goddamn stdout!

But it doesn't end there. The default configuration it did for Freenode was a server password. Now, you can usually use 3 ways to authenticate, each with their advantages and disadvantages. These are server password, SASL and NickServ. SASL is widely regarded to be the best option and if it's supported by the IRC server, that's what everyone should use. Server password and NickServ are pretty much fallback.

So, plaintext password, default server password instead of SASL, what else.. oh, yeah. ZNC would be a server, right. Something that runs pretty much forever, 24/7. So you'd probably expect there to be a systemd unit for it... Except, nope, there isn't. The ZNC project recommends that you launch it from the crontab. Let that sink in for a moment.. the fucking crontab. For initializing services. My whole life as a sysadmin was a lie. Cron is now an init system.

Fortunately that's about all I recall to be wrong with this thing. But there's a few things that I really want to tell any greenhorn developers out there... Always look at best practices. Never take shortcuts. The right way is going to be the best way 99% of the time. That way you don't have to go back and fix it. Do your app modularly so that a fix can be done quickly and easily. Store passwords securely and if you can't, let the user know and offer alternatives. Don't put it on the stdout. Always assume that your users will go with default options when in doubt. I love tweaking but defaults should always be sane ones.

One more thing that's mostly a jab. The ZNC software is hosted on a .in domain, which would.. quite honestly.. explain a lot. Is India becoming the next Chinese manufacturers for software? Except that in India the internet access is not restricted despite their civilization perhaps not being fully ready for it yet. India, develop and develop properly. It will take a while but you'll get there. But please don't put atrocities like this into the world. Lastly, I know it's hard and I've been there with my own distribution project too. Accept feedback. It's rough, but it is valuable. Listen to the people that criticize your project.

Drupal makes me want to go back to the moment that life first crawled out of the ocean, and shoot that first land-dwelling organism in the head – just to make sure that the animal kingdom never evolves to the point where a crime as ghastly as Drupal can occur.

Drupal somehow manages to be both unforgivingly, bureaucratically rigid, and an anarchic, spaghetti-coded mess – at the same time. Other frameworks are toolboxes. Drupal is a series of windows at the IRS or MVA – and it *will* take you days to figure out which series of forms you have to submit, with which boxes checked, in order to accomplish your goal.

The documentation is complete and utter trash.

It models content in a way that makes all sorts of assumptions about your use case. And those assumptions don't have anything to do with *how websites are actually designed and built*. In 20 years of building websites, I've never *once* wanted to use anything resembling the bizarre data model that Drupal *forces* you to use. Nor have I ever thought "gee, I wish my platform forced me to stop writing code every 20 seconds, so I can use an atrociously designed point-and-click interface".

I ask the community how to accomplish [insert extremely fucking basic task here], and they say: "well, you just install these 17 modules, glue them together with a bunch of configuration that couples your database to your code, and then shrug at the hideously broken HTML/CSS that comes out, because we give exactly zero shits about UX! isn't it great how Drupal makes things so easy?" Like, no – literally *every other framework on the planet* allows you to accomplish the same thing with just a few lines of code.

Most of the community seems to have little or no experience with other frameworks – so they seem solipsistically unaware that these are even problems. If your platform has been stabbing you in the arm for as long as you've been building websites, then you're just gonna assume that being stabbed in the arm is part of developing websites, you know? They seem oblivious to the fact that things are *so much easier* when your platform just lets you build whatever abstractions you need, instead of forcing its own weird-ass, undocumented assumptions on you.

Uruururrrrrrrggghgh. I can't understand how anyone defends this piece of garbage. If you're a Drupal developer reading this – please, for the love of God, try learning another framework. Once you've spent a couple of weeks learning saner ways of doing things, you'll never look back. I cannot comprehend how Drupal is still a thing.

So I got access to a new Centos server. I had to install applications like Mysql, tomcat etc. The install was easy but configuration to be done were fucking headache. Admin guys were such Assholes that they dint care much to help. It took me 3 days to finally sort out and got things running. Yay! I believe I learnt a lot about Linux. Thank you Admin for being such an asshole✌️

There's no provisioning script. Code repo's there, but no configuration files. Missing folders that break the app. No documentation on what to install, what directories to create, NO instructions. Nothing. Just an empty Ubuntu vagrantbox and a git repo. Took the entire morning and then some, just to replicate the dev environment. Fuck

Best feeling I've felt all week: Even though I don't have time today to install it, I got Wi-Fi on the minimal install ISO of Gentoo to work with almost no configuration. My shitty ass dongles actually work???

Status: Got off hour+ long call with provider teir2 tech support because their "sync service" isn't syncing. "It's all cloud controlled" they tell me. Whatever.

It does have the ability to install a Windows service to do the needful! 🎉

However the program that does the actual syncing is the "launcher" application, and the service's only job is to tell the launcher to run. 🤦‍♂️

Their assumption is that there will be a user that gets smacked in the face with a UAC prompt when they first log in and just shrug it away. Which is the Launcher application.

The sync service is not capable of running the sync application without a desktop session I guess?

MOTHERTRUCKERS do you understand what the point of a Windows Service is?!?

I tried relating this situation to how Windows Update works: It will update whenever the fuck it wants without the user doing anything because of the Service, and you only configure the service with the Control Panel/Settings App. You don't need the Control Panel/Settings App running in order for Windows Update to work, but it's there for status info and configuration.

Anyways, this software does not do that. It apparently *requires* both the service AND the launcher program running in order to work. Not work properly, to work *at all*.

Anyways, It's installed on a computer that's not normally logged into, but is always on (where other "always needs to be running" programs live). Normally the hackaround would be to launch the program via Scheduled Task.

This program apparently does not want to run as a scheduled task, or the Task Scheduler is being stupid and can't figure out "Hey, it's time to run this program. Do it!". Naturally it runs if told manually.

The fact that I'm even doing this at all is stupid, but even more infuriating is that it's just not working unattended. You know, what the service should be doing. But no, the service runs happily all alone, doing nothing of note, while Task Scheduler sucks its stick running OneDrive installer but not the launcher program.

Pluckin' donuts...

The more I use snaps on Linux, the more I feel like we came the full circle. Installable package (snap) contains a bundle of all dependencies, and installs them in an isolated system path to avoid version incompatibilities. Snaps can can have some sort of install-time configuration, and they create links to a handful of entry points rather than adding all executables to the path. In short, they do the exact same thing Windows installers have been doing for the past 30 years.

Last weekend I was working on a small project for a friend of mine: a dockerized webapp, plus API backend and DB. I had some problems with the installation on the vps and had to try out different images and never really did a complete setup of my usual dotfiles. Got it running on an Ubuntu distro. Everything great.
It was the first release so I still had to check that every configuration worked ok, like letsencrypt companion container, the reverse proxy and all that stuff, so I decided to clone the whole project on the server tho make the changes there and then commit them from there.
Docker compose, 10 lines of code, change the hosts and password. Boom everything working. Great... Except for the images in the webapp.

WTF? Check the repo, here they are, all ok. I try different build tactics. Nothing. Even building the app on another docker always the same. Checked browser cache, all the correct ports are open. I even though that maybe react was still using some weird websocket I didn't know, but no.
Damn, I spent 5 hours checking why the f*** the server wouldn't make it out.

Then, finally, the realization...

I didn't install the f******* git-lfs plugin and all I was working with were stupid symbolics links! Webpack never even throw an error for any of the stupid images and the browser would only show a corrupted image, when decoding the base64 string.

Literally the solution took 5 minutes.
F*** changes on production, now I do everything on a fully automated CI.

Hmm. I've been wondering how I'll deploy an api based on a microservice style the smartest way... The general plan was to use salt to setup the base server and install dependencies and add the configuration.. Doing updates would be a git pull and pm2 restart api. I would love to know how you deploy your software ?

So, i'm trying to get linkr (a pretty cool short link service) to work in a docker container since 4 hours now to host it on my server. There is no official container because it needs a working database connection and stuff during installation which can only be done via console and (for whatever reason I couldn't find out yet) need to be done while building the container. The problem is, I can't connect it to the database while building the container so there is no database during installation to create tables and stuff and the build will fail. ARGH.
Why the hell would you do this????? Theyre actually saying in their readme there is no dockerfile because the config options are specific to your configuration...?!?!
The thing is entirely written in python, so reading and parsing configfiles on the fly should not really be a problem.

Of course I could ssh into the container and run the installation script but that's not the point.

Docker is not about being lazy.
It's about portability.
Maybe I don't want to bloat my server with your 39579372639 npm dependencies? Or I don't want to install a freakin apache, because I have every other site on nginx and therefore wouldn't work with apache.

AAAAAAAARRRRRRGGHHGGGGG

in the end, I'm probably going to modify the thing to install tables when running the container and giving the first user admin rights instead of prompting to enter credentials for a new admin user.
And yet I didn't even speak python.

After some time, planning to install Linux again for personal use and some dev work at home. My current pc is getting too slow sometimes and it irritates me a lot.

My current pc 2gb RAM, Dual core Intel, 32 bit.

Main criteria, os should be fast, I can compromise on GUI, should be stable, should support my old configuration. I like to work on Java/Scala, python, js and sql. Eclipse will be there since I use it at work.

Short listed Ubuntu 16.04.2 LTS,
mint (huge confusion on gui),
Opensuse, elementary OS and arch. I had Ubuntu, mint for some time as secondary OS. Arch will be totally new world for me. I have tried few OS in USB boot but couldn't fix one.

Right now I am confused about which one to choose, since everything looks fine but I want the best choice based on my criteria.

So, today, I wanted to try setting up a wireguard VPN server on my little raspberry pi at home. I... expected /some/ issues, but what I found dumbfounded me.

1 - I already had the wireguard package from the unstable branch of the main raspbian repo installed... Huh, okay.
2 - Setting up config was extremely easy... Wow, so the rumors were true. Wireguard really is almost dumb-simple.
3 - Failed to create a network interface? Oh, trouble, here it is! So lets see... modprobe wireguard... Nope. Don't have the module? What?
4 - Reconfigure package to rebuild the module - missing kernel headers? Huh... weird

This was the simple stuff... Then I went down the rabbit hole of the Raspberry Pi ecosystem:

1 - There is the Raspberry Pi Bootloader, that is apparently separate from the Kernel itself. And I didn't seem to have any of the standard linux-image-* installed... What? Weird, yet there I was, running a 4.19.42-v7+ kernel...
2 - No kernel and no headers... What... The... Fuck
3 - Okay, so... Lets just... try to install the latest kernel image then? One apt-get install... It downloaded the image, but during package configuration, it failed because... I didn't have... its headers? What? What for? And if it needs them (for whatever reason), why isn't the headers package as a dependency? Ugh, whatever...
4 - Another apt-get install and... Okay, building the initrd image aaaaand...
FAIL
WHAT. What is it this time!?

Oh... Ran... No more space on device? What? Is /boot independent? Of course it is, it has to be, its a bloody different filesystem

Okay, so, lets che-OH MY GOD WTF.

Its just bloody 45 MBs big! The entire /boot is just 45 MBs large. WHY. THE. FUCK.

This was a default raspbian install from I have no idea when. But... Why. Oh WHY would ANYONE pre-configure /boot to be this incredibly tiny!?

No wonder the new init ramdisk couldn't fit in there! Its already used up from 64%!

Thanks, Raspbian Devs, now I gotta reinstall the whole system because, yes, the /boot is, of course, sector 8192. Just far enough from 2048 that there are *some* sectors free - About 3 MBs.

So what did I try? Remove the partition and recreate it from the very beginning. Only... I never tried in in the past, and okay, kernel doesn't like having the partition where its image resides deleted on the fly, it will not give up FDs pointing there or something.

So now, I have a system I cannot reboot, or it will never boot back up :|

Thanks, Raspbian!

I need to get a cheap 1U somewhere or something T.T

Let me tell you about my wonderful weekend. It all started with a game that doesn't run in wine and it ended up in the biggest nightmare of Windows Update and EFI configuration.
1 - let's boot on my Windows partition to play trackmania 2.
2 - Windows Update interrupts me while driving a track.
3 - Update keep failing over and over again.
4 - I keep trying things to fix Windows Update, but with no success.
5 - Let's try system restore, failed
6 - Let's try to do a reset. "You don't have a recovery drive". Oh, right...
7 - Let's try to upgrade Windows 10 to Windows 10, just because. Nope, "we could not determine if your pc can run Windows 10". Wait what....
8 - I guess I'll be reinstalling this trash. "Nope, can't. Don't like that partition I just formatted". Of course you can't...
9 - Had to delete the partition and let it create new ones. It created a new EFI partition. Just why???
10 - Okay that worked. Let's fix grub now.
11 - Maybe not, let's try rEFInd, because it looks fancy.
12 - After rebooting on the live USB for about 50 times and reconfiguring rEFInd without any luck, I realised the install script didn't install fs drivers for ext4. Oh, right... That's why you didn't find any Linux kernel...
13 - It can't boot windows, they're using a different EFI partition. Let's move rEFInd to the new EFI partition windows created for me.
14 - Finally everything works again. So much effort to play a freaking game without being bothered by windows update. And rEFInd abience theme looks beautiful.

I've got to say though, I learned a lot and the Arch wiki is awesome!

Microsoft Windows can burn.

I have this feature where I configure a remote API via some endpoints and the API pushes data back to some webhooks in my API.

Yesterday I set everything up for the final test; fired up my own API with some test data, added some configuration and started trace logging to ensure that everything works as expected when the remote site tries to send me data.

I was ready to collect ! Enter this morning: Windows have forcibly rebooted to install an update and shut everything down.

inb4 install Linux; No, I can not. Windows is company policy and I am required to use shit that is only designed for Windows.

tl;dr Which new laptop + Linux distro combo should I get when seeking for minimal configuration and maintenance hassle?

Hey devRant gang!

I'm looking for a new laptop: which one is supported out-of-the-box by Ubuntu based Linux distros like Elementary OS?

Why Elementary OS you ask? Well, I want to move away from macOS and/but keep the minimal (and pretty) design/interface!

But: I don't want to waste time configuring stuff after install or a kernel update. I don't have time for that: I need to get shit done.

As much as I dislike closed source/evil corporate stuff the fact of the matter is that my MacBook Pro Just Works (and lets me get shit done).

Form plugin for WordPress on a seriously out of date install won't update until I update WordPress core. Fine, I update core and update the plugin and test the forms again. Form still isn't sending emails on submission. Look into forms settings. Oh look error messages, awesome!

Message: "There are 2 configuration errors"

OK, what are the errors where are the errors?

"There are two configuration errors."

Gee that's really fucking helpful, why even tell me you can see the errors if you aren't going to fucking tell me where the blasted things are. Spend 4 fucking hours trying to figure this out, checking "docs" wiki, support forums, nothing.

Finally decided to just trash the client's form plugin they were using and installed my reliable Gravity Forms.

P.S. if you are going to write code to find errors, and tell me about them, then you had better fucking tell me what the goddamned error is. There is no need to waste a developer's time trying to debug your shitty plugin because you couldn't be bothered to write a useful error handler.

I've been wondering about renting a new VPS to get all my websites sorted out again. I am tired of shared hosting and I am able to manage it as I've been in the past.

With so many great people here, I was trying to put together some of the best practices and resources on how to handle the setup and configuration of a new machine, and I hope this post may help someone while trying to gather the best know-how in the comments. Don't be scared by the lengthy post, please.

The following tips are mainly from @Condor, @Noob, @Linuxxx and some other were gathered in the webz. Thanks for @Linux for recommending me Vultr VPS. I would appreciate further feedback from the community on how to improve this and/or change anything that may seem incorrect or should be done in better way.

1. Clean install CentOS 7 or Ubuntu (I am used to both, do you recommend more? Why?)
2. Install existing updates
3. Disable root login
4. Disable password for ssh
5. RSA key login with strong passwords/passphrases
6. Set correct locale and correct timezone (if different from default)
7. Close all ports
8. Disable and delete unneeded services
9. Install CSF
10. Install knockd (is it worth it at all? Isn't it security through obscurity?)
11. Install Fail2Ban (worth to install side by side with CSF? If not, why?)
12. Install ufw firewall (or keep with CSF/Fail2Ban? Why?)
13. Install rkhunter
14. Install anti-rootkit software (side by side with rkhunter?) (SELinux or AppArmor? Why?)
15. Enable Nginx/CSF rate limiting against SYN attacks
16. For a server to be public, is an IDS / IPS recommended? If so, which and why?
17. Log Injection Attacks in Application Layer - I should keep an eye on them. Is there any tool to help scanning?

If I want to have a server that serves multiple websites, would you add/change anything to the following?
18. Install Docker and manage separate instances with a Dockerfile powered base image with the following? Or should I keep all the servers in one main installation?
19. Install Nginx
20. Install PHP-FPM
21. Install PHP7
22. Install Memcached
23. Install MariaDB
24. Install phpMyAdmin (On specific port? Any recommendations here?)

I am sorry if this is somewhat lengthy, but I hope it may get better and be a good starting guide for a new server setup (eventually become a repo). Feel free to contribute in the comments.

Fuck maven. For fucks sake. If you want to install something in js project, you do yarn add ... and shit works. If you want to install on linux you do apt-get ... If you want to install ANYTHING on windows in fuckin 2020 you download it and it has an .exe.

But not maven. Oh nooooo. You need to do all the bullshit with configuration, set shitty paths and just pray for someone to shoot you.

Don't punish me for Windows. It's a God damn corporate policy not my sane choice...

I have never understood the default configuration of Javascript Back-end frameworks.

The documentation says -> Install expressjs. Its a "framework".

But then u need to setup EVERYTHING yourself. Install cookie-parser, body-parser, io, routing FUCKING everything !!!

Why can someone not make it a standard installation covering the basic necessities ??

This conversation happened yesterday between me and a client:

"I need drivers for my Hackintosh build, macOS doesn't find and install the graphics card and the NIC"

I laughed at first, then i asked him his configuration..

"I have a 6700K and an MSI M3 H170"

Okay, things are getting worse here...

"So do you know the difference between H170 and Z170?"
"Yes, I have bought an H170 one because i do not overclock"
"Then, tell me why the f*ck you have bought a K processor if you do not f*cking overclock..."
"Because is more powerful"

F*ck no, he didn't said that...

How can a novel emerging challenger software (written in Rust) take me 4 hours to install (still ongoing)?

Today I have decided to give Pijul a go. Pijul describes itself as a theory-sound alternative to Git, which I have wanted to get away from for a while now, due to various reasons -- many of which I saw Pijul advertise to have solved on design level.

So I set away a day to learn Pijul, today. Well, 4 hours after I sat down -- after a number of hilariously wonky failures of "Rust ecosystem" to do the right thing as I had to install Rust with some shell one-liners those insane wizards recommend for installation process (all in the name of "stability but not stagnation") -- Pijul has now been installing with the blasted `cargo` for an hour now (that's after 3 hours of getting to the point where `cargo install pijul` stopped exploding in my face) -- telling me I only have 40 crates more to install. Are they throttling me, perhaps? I don't care -- I should have been installing Pijul from a repository in accordance with my Linux distribution, or -- at worst -- download a BLOODY COMPILED PROGRAM IMAGE.

What is it with the hipster developers today? Everything they get of tools, they subsume and churn out intricate complexities the likes of which we hadn't seen yesterday. Tell me fellow developers who think installation of your software has to require three and a half novel "installation solutions" to which I can't be arsed to be made privy -- do you think your life today is easier than, I don't know -- wrangling with a Makefile and a C compiler (which today thankfully can do rather good job of standards compliance)?

I mean I wouldn't mind Pijul being written in Rust -- but it turns out Rust's advertised elegancy in practice is wrapped in so much "giftwrap" I feel like what desire I had to learn Rust myself, I'll stear well clear.

Here's an advice for developers in general -- an advice continiously ignored for decades -- stop blowing your original scope of delivery in auxilary packages you think you need to reinvent just because you can or because your mom is out of town! For programming languages like Rust this most certainly entails NOT writing your own package manager, with its own package delivery mechanism that has its own configuration file format and virtual machine to configure dependency resolution or what have you!

You wanted to write a programming language that has novel features you think we need? Fine -- write one and stop there. Watch it grow, and watch people who are busy working on other parts (scopes) of software to integrate your offer.

What a shitshow. Stop smuggling alternative package managers, installers, and discombulators with your actual product -- I only want the latter, I don't want the rest of your damn piping, walls, roof and a cathedral on top of it!

Don't be that guy starting with a pin, and ending up with a fucking diorama miniature of a pig farm in Netherlands. Jesus.

I have been working on a long time, low progress project of mine that keeps on giving and giving.

Let's begin like two years ago where I dipped my toes into "more then gigabit" networking thanks to a Linus Techtips video about infiniband.
I had the dream of booting my Workstation from my NAS, a so called diskless setup.

Well, since I run FreeNAS on my Nas , a very nice Freebsd based Nas OS, everything's gonna be good.

In the beginning, there was no infiniband support.
Turns out, you don't need it, since the mellanox CX2 nics can do ETH too.
Yay.
Just took me a few weeks of anger.

So, to be able to boot something over the network, you need firmware that finds the bookable stuff and loads it.
That protocol and firmware is called PXE.
PXE needs a DHCP telling it what to do, and what is where and etc.

Freenas here I come! Installing dnsmasq on the actual freenas install turned out to be not that great of an idea because freenas thinks of itself as being an "appliance" that you don't fiddle with. So things work, until you update/ upgrade when everything will basically be wiped, except what you have done through the ui.
Ok. So I gona use a jail, a container like thing for that.
Everything is great, jail has internet, everything Installs fine, what could go wrong?
Dnsmasq can launch and work, but not as dhcp server. Some thing about permissions.
Turns out, jails have permission like things.
A few days of head scratching later, it has ALL the permissions.
Dnsmasq still can't work as DHCP server though, why you ask?
Because it needs a specific kernelmodule that isn't contained in the jail. Since jails are kind of like a docker container, they run on the same OS kernel, who does not have this module, I'd need to patch the freenas, which is an appliance, so fuck that.

Like a year later, freenas has finally added good VM support, so why not make a VM for the dhcpserver?

Well, about a year ago, I didn't know that the virtual Intel nic is a fucken unstable piece of garbage, crashing nearly any OS at some point.

So that was it for a while again.

Now to the last few weeks.
Finally dnsmasq is running in a freebsd VM with a good and working configuration which is rather simple, if those tutorial fuckers out there would explain shit instead of just telling you to copy, paste and replace X.

Now back to the PXE side.
I'm using iPXE because I have no clue how to boot anything over tftp so iSCSi it is, since that is what I can relate too.
The idea behind iscsi is to fake a SCSI disk over the network. Attached devices appear as if they are actually directly connected to the machine instead of over the network.

iPXE gets a lease from the server, can connect to it, everything is fucken great. Finally.
Except that if it "sanBoots" the iscsi drive, it can't find anything to boot.
Well fuck.
If I attach a Linux live USB over iscsi, it boots, finds grub, and crashes because the live iso isn't configured for network-boot.
But it boots.
So what's so different?

Well iPXE is booted in legacy mode, where as the content of the target is windows 10 in efi mode.
Ffff.

Ok. Can I get iPXE to boot in EFI mode?

Well yes, after like 3 days fiddling with it.
But it only finds the onboard Intel nic instead of the new Mellanox CX3 cards, and can't even connect to the target....

Sooo, I guess my options are as follows.
Either, get PXE efi to work on the network cards directly, its called flexboot and might be able to since I just found some firmware options for that.

Or give up on efi and install windows in legacy mode.
Which isn't that easy when it has to end up on a drive on my nas.